Number System for the RRB NTPC CBT
The number system is the first chapter of arithmetic in the RRB NTPC Mathematics paper and it supports every other chapter. A candidate who is clear about the kinds of numbers, the place value of a digit, divisibility and the unit digit can answer quickly, because these questions are short and need no long calculation. In CBT-1 and CBT-2 the paper usually carries two or three questions from this area, and they are among the safest marks in the section if the basics are ready.
The numbers we use are arranged in a clear family. The natural numbers are the counting numbers 1, 2, 3 and so on. When zero is included with the natural numbers the set becomes the whole numbers. The integers add the negative numbers, so they run ... -2, -1, 0, 1, 2 ... . A rational number can be written as a fraction of two integers with a non-zero denominator, and its decimal form either ends or repeats. An irrational number cannot be written in that way, and its decimal never ends and never repeats. Numbers like the square root of 2 and pi are irrational, while 22/7 is only an approximation of pi and is itself rational.
Prime numbers are the building blocks of the whole number system. A prime number has exactly two factors, one and itself. The number 2 is the smallest prime and the only even prime. The number 1 is neither prime nor composite, because it has only one factor. A composite number has more than two factors. Two primes that differ by 2, such as 5 and 7 or 11 and 13, are called twin primes, and this pair is asked directly. Learning the primes up to 100 is worth the effort, because many questions ask for the number of primes in a range or for the largest prime below a limit.
The place value and the face value of a digit are asked very often and are easy marks. The face value of a digit is the digit itself, whatever its position. The place value depends on the position, so in the number 5,47,320 the digit 4 stands in the ten-thousands place and its place value is 40,000, while its face value is only 4. The difference between the place value and the face value of that digit is therefore 39,996. A question may also ask for the greatest or the smallest number formed from a given set of digits; to make the greatest number arrange the digits in descending order, and to make the smallest arrange them in ascending order, but remember that a number cannot begin with zero, so the smallest non-zero digit must come first.
Divisibility rules save time and are asked as statements. A number is divisible by 2 if its last digit is even, and by 5 if it ends in 0 or 5. It is divisible by 3 if the sum of its digits is divisible by 3, and by 9 if the sum of its digits is divisible by 9. For 4 the last two digits must form a number divisible by 4, and for 8 the last three digits must form a number divisible by 8. A number is divisible by 6 when it is divisible by both 2 and 3, and by 11 when the difference between the sums of the digits in the odd and even places is either 0 or a multiple of 11. These rules let a candidate test an option in a few seconds instead of dividing it out.
The HCF and the LCM are two ideas that go together, and questions often join them. The highest common factor, or HCF, is the greatest number that divides each of the given numbers exactly. The least common multiple, or LCM, is the smallest number that each of the given numbers divides exactly. For any two numbers, the product of their HCF and their LCM is equal to the product of the numbers themselves, so if three of the four values are known the fourth can be found at once. This single relation answers a whole family of questions and should be memorised.
Many word problems are built on the LCM and the HCF. If a question asks for the least number that leaves the same remainder when divided by several numbers, the answer is the LCM of those numbers plus the common remainder. If it asks for the greatest number that divides several numbers leaving the same remainder, the answer is the HCF of the differences of those numbers. If it asks for the smallest number that is exactly divisible by several numbers, the answer is simply their LCM. Recognising which of these three shapes a question has is the whole skill.
The unit digit of a large power is a favourite question because it needs no full calculation. The unit digit of a power repeats in a short cycle. For the base 2 the cycle is 2, 4, 8, 6, and for the base 3 it is 3, 9, 7, 1. For the base 4 the unit digit is 4 for an odd power and 6 for an even power, and for the base 9 it is 9 for an odd power and 1 for an even power. The bases 5 and 6 always keep the same unit digit, and the bases 0 and 1 do the same. To find the unit digit, divide the power by the length of the cycle and use the remainder to pick the term of the cycle.
The number of factors of a number is found by prime factorisation. Write the number as a product of powers of primes, then add one to each power and multiply. For example 60 is 2 squared times 3 times 5, so the number of factors is (2+1)(1+1)(1+1), which is 12. The same factorisation gives the sum of the factors and the number of ways to write the number as a product of two factors. The number of trailing zeros in a factorial is found by counting the number of times 5 appears in it, so in 20 factorial there are 20 divided by 5, that is 4 zeros, and in 100 factorial there are 20 plus 4, that is 24 zeros.
Squares, cubes and their roots are asked as direct values and as perfect-square problems. A perfect square is a number that is the product of an integer with itself, and a perfect cube is the product of an integer with itself twice. To make a given number a perfect square, prime-factorise it and multiply or divide by the missing or extra prime so that every power becomes even. Learning the squares up to 30 and the cubes up to 15 by heart removes almost all the work from these questions.
Fractions and decimals belong to the same chapter because a fraction can always be turned into a decimal and a decimal into a fraction. To compare fractions quickly, convert them to decimals or give them a common denominator. A terminating decimal such as 0.375 becomes 375/1000, which reduces to 3/8. A recurring decimal such as 0.666 repeating becomes 2/3, because the digit 6 repeats from the first place. While multiplying decimals, count the total number of decimal places in the two numbers and put that many places in the answer, and while dividing, first make the divisor a whole number by shifting the decimal point in both numbers.
Series and sums appear in the paper as short formulas. The sum of the first n natural numbers is n times n plus one, divided by two. The sum of the first n odd numbers is n squared, and the sum of the first n even numbers is n times n plus one. The sum of the squares of the first n natural numbers is n times n plus one times two n plus one, divided by six, and the sum of the cubes of the first n natural numbers is the square of the sum of the first n natural numbers. These four results cover nearly every series question in the paper.
Roman numerals and the idea of a number line complete the chapter. In the Roman system the letters I, V, X, L, C, D and M stand for one, five, ten, fifty, one hundred, five hundred and one thousand. When a smaller letter is written before a larger one its value is subtracted, as in IV for four and XL for forty, and when it is written after, its value is added, as in VI for six. On the number line the distance of a number from zero is its absolute value, so the absolute value of minus twenty-three is twenty-three, and the number of integers between two given integers is found by counting the whole numbers strictly between them.
Finally, the number system is best revised as a set of small, sharp facts rather than as a long calculation. Keep ready the family of numbers, the list of primes, the divisibility rules, the HCF and LCM relation, the cycles of unit digits, the formulas for the sums of series, and the conversions between fractions and decimals. A candidate who can recall these on demand will find that the number-system questions in the paper are quick to read, quick to solve and easy to score, which is exactly what the section needs.
Key facts to remember
- Natural numbers start at 1; whole numbers include 0; integers include the negatives too.
- 2 is the smallest and the only even prime; 1 is neither prime nor composite.
- Place value depends on the position of the digit, while the face value is the digit itself.
- Divisibility: by 2 (even last digit), 3 (digit sum), 4 (last two digits), 5 (ends 0 or 5), 8 (last three digits), 9 (digit sum), 11 (alternating digit-sum difference).
- HCF x LCM = product of the two numbers.
- Least number leaving the same remainder = LCM of the numbers + the remainder.
- Greatest number dividing several numbers leaving the same remainder = HCF of their differences.
- Unit-digit cycles: 2 -> 2,4,8,6; 3 -> 3,9,7,1; 4 -> 4 (odd), 6 (even); 9 -> 9 (odd), 1 (even).
- Number of factors: prime-factorise, add 1 to each power, multiply.
- Trailing zeros in n! = [n/5] + [n/25] + [n/125] + ... .
- Sum of first n natural numbers = n(n+1)/2; of squares = n(n+1)(2n+1)/6; of cubes = [n(n+1)/2]^2.
- 0.375 = 3/8 and 0.666... = 2/3 are standard fraction-decimal conversions.
- Roman numerals: IV = 4, IX = 9, XL = 40, XC = 90, CD = 400, CM = 900.
Frequently Asked Questions
Is 1 a prime number?
No. A prime number must have exactly two factors, one and itself. The number 1 has only one factor, so it is neither prime nor composite, and the smallest prime number is 2.
How do I find the unit digit of a large power quickly?
Learn the short cycle of the unit digit of the base. For 2 the cycle is 2, 4, 8, 6 and for 3 it is 3, 9, 7, 1. Divide the power by the length of the cycle and use the remainder to pick the term; a remainder of zero means the last term of the cycle.
What is the relation between HCF and LCM?
For any two numbers, the HCF multiplied by the LCM equals the product of the two numbers. So if any three of the four values are known, the fourth can be found at once, which answers a large family of questions.
How many zeros are there at the end of 100 factorial?
Count the number of 5s in 100 factorial. It is 100 divided by 5 plus 100 divided by 25, which is 20 plus 4, so there are 24 trailing zeros.
Which divisibility rules are used most in the paper?
The rules for 2, 3, 4, 5, 6, 8, 9 and 11 come up again and again. Among them the digit-sum rules for 3 and 9 and the last-digit rules for 2 and 5 are the quickest, so they should be recalled first while testing the options.