Simple Machines & Instruments

সৰল যন্ত্ৰ আৰু যন্ত্ৰপাতি • Technical / Science • DHS & DME Technical Grade III

Back to Technical / Science

30 Questions with Answers

Q1. A lever in which the fulcrum lies between the load and the effort is called a
যি লিভাৰত ভাৰ আৰু প্ৰচেষ্টাৰ মাজত আলম্ব থাকে তাক কি বোলা হয়
(A) lever of the first class প্ৰথম শ্ৰেণীৰ লিভাৰ
(B) lever of the second class দ্বিতীয় শ্ৰেণীৰ লিভাৰ
(C) lever of the third class তৃতীয় শ্ৰেণীৰ লিভাৰ
(D) inclined plane নত সমতল
Answer: A) lever of the first class
A) প্ৰথম শ্ৰেণীৰ লিভাৰ
Explanation: In a first class lever the fulcrum sits between effort and load, as in a pair of scissors or a seesaw. Second class levers put the load in the middle.
প্ৰথম শ্ৰেণীৰ লিভাৰত আলম্ব প্ৰচেষ্টা আৰু ভাৰৰ মাজত থাকে, যেনে কেঁচি বা দোলনাত। দ্বিতীয় শ্ৰেণীত ভাৰ মাজত থাকে।
Q2. A wheelbarrow is an example of a lever of the
ঠেলা গাড়ী কি শ্ৰেণীৰ লিভাৰৰ উদাহৰণ
(A) second class দ্বিতীয় শ্ৰেণী
(B) first class প্ৰথম শ্ৰেণী
(C) third class তৃতীয় শ্ৰেণী
(D) fourth class চতুৰ্থ শ্ৰেণী
Answer: A) second class
A) দ্বিতীয় শ্ৰেণী
Explanation: The wheel is the fulcrum at one end, the load sits between it and the effort at the handles, so the load is in the middle and the lever is second class.
চকাটো এমূৰে আলম্ব, ভাৰ তাৰ আৰু হাতলৰ প্ৰচেষ্টাৰ মাজত, সেয়ে ভাৰ মাজত আৰু লিভাৰ দ্বিতীয় শ্ৰেণীৰ।
Q3. A pair of tongs is an example of a lever of the
চিমটা কি শ্ৰেণীৰ লিভাৰৰ উদাহৰণ
(A) third class তৃতীয় শ্ৰেণী
(B) first class প্ৰথম শ্ৰেণী
(C) second class দ্বিতীয় শ্ৰেণী
(D) inclined plane নত সমতল
Answer: A) third class
A) তৃতীয় শ্ৰেণী
Explanation: In tongs the effort is applied between the fulcrum at the hinge and the load at the tips, so the effort lies in the middle and the lever is third class.
চিমটাত প্ৰচেষ্টা কব্জাৰ আলম্ব আৰু আগৰ ভাৰৰ মাজত প্ৰয়োগ হয়, সেয়ে প্ৰচেষ্টা মাজত আৰু লিভাৰ তৃতীয় শ্ৰেণীৰ।
Q4. The mechanical advantage of a machine is defined as
যন্ত্ৰ এটাৰ যান্ত্ৰিক লাভ কি হিচাপে সংজ্ঞায়িত হয়
(A) load divided by effort ভাৰ ভাগ প্ৰচেষ্টা
(B) effort divided by load প্ৰচেষ্টা ভাগ ভাৰ
(C) load multiplied by effort ভাৰ গুণ প্ৰচেষ্টা
(D) effort minus load প্ৰচেষ্টা বিয়োগ ভাৰ
Answer: A) load divided by effort
A) ভাৰ ভাগ প্ৰচেষ্টা
Explanation: Mechanical advantage compares the load lifted with the effort applied, so it is load over effort. A value above one means the machine multiplies force.
যান্ত্ৰিক লাভে উঠোৱা ভাৰ আৰু প্ৰয়োগ কৰা প্ৰচেষ্টাৰ তুলনা কৰে, সেয়ে ভাৰ ভাগ প্ৰচেষ্টা। একৰ ওপৰৰ মানে যন্ত্ৰই বল বঢ়ায়।
Q5. In an ideal machine the mechanical advantage is equal to
আদৰ্শ যন্ত্ৰত যান্ত্ৰিক লাভ কিৰ সমান
(A) velocity ratio বেগ অনুপাত
(B) efficiency দক্ষতা
(C) zero শূন্য
(D) effort প্ৰচেষ্টা
Answer: A) velocity ratio
A) বেগ অনুপাত
Explanation: An ideal machine has no friction, so all the work put in comes out and efficiency is one. That makes mechanical advantage equal to velocity ratio.
আদৰ্শ যন্ত্ৰত ঘৰ্ষণ নাই, সেয়ে দিয়া সকলো কাম ওলায় আৰু দক্ষতা এক। তেতিয়া যান্ত্ৰিক লাভ বেগ অনুপাতৰ সমান।
Q6. The efficiency of a machine is always less than one hundred percent because of
যন্ত্ৰৰ দক্ষতা সদায় এশ শতাংশতকৈ কম কাৰণ
(A) friction ঘৰ্ষণ
(B) gravity মহাকৰ্ষণ
(C) inertia জড়তা
(D) momentum ভৰবেগ
Answer: A) friction
A) ঘৰ্ষণ
Explanation: Some of the work input is used up overcoming friction at the moving parts, so the work output is always less than the work input.
কিছু কাম চলন্ত অংশত ঘৰ্ষণ নিবাৰণত খৰচ হয়, সেয়ে কাম উৎপাদ সদায় কাম প্ৰদানতকৈ কম।
Q7. A single fixed pulley changes
এটা স্থিৰ একক কপাৰি কি সলনি কৰে
(A) the direction of the force only কেৱল বলৰ দিশ
(B) the magnitude of the force only কেৱল বলৰ পৰিমাণ
(C) both magnitude and direction পৰিমাণ আৰু দিশ দুয়োটা
(D) neither magnitude nor direction পৰিমাণ বা দিশ একো নহয়
Answer: A) the direction of the force only
A) কেৱল বলৰ দিশ
Explanation: A fixed pulley has a mechanical advantage of one, so it gives no force gain, but it lets you pull down to lift a load up, which is convenient.
স্থিৰ কপাৰিৰ যান্ত্ৰিক লাভ এক, সেয়ে বল লাভ নাই, কিন্তু ভাৰ ওপৰলৈ তোলাবলৈ তললৈ টানিব পাৰি, যি সুবিধাজনক।
Q8. The mechanical advantage of a movable pulley used alone is
অকলৈ ব্যৱহৃত চলন্ত কপাৰিৰ যান্ত্ৰিক লাভ
(A) 2 ২
(B) 1 ১
(C) 0.5 ০.৫
(D) 4 ৪
Answer: A) 2
A) ২
Explanation: Two rope segments share the load, so the effort is half the load and the mechanical advantage is two. A fixed pulley alone would give only one.
দুটা ৰছাৰ অংশে ভাৰ ভাগ কৰে, সেয়ে প্ৰচেষ্টা ভাৰৰ আধা আৰু যান্ত্ৰিক লাভ দুই। অকলৈ স্থিৰ কপাৰিয়ে কেবল এক দিব।
Q9. An inclined plane is used to
নত সমতল কিৰ বাবে ব্যৱহৃত হয়
(A) raise a load with less effort over a longer distance বেছি দূৰত্বত কম প্ৰচেষ্টাৰে ভাৰ তোলিবলৈ
(B) raise a load with more effort over a shorter distance কম দূৰত্বত বেছি প্ৰচেষ্টাৰে ভাৰ তোলিবলৈ
(C) change the direction of a force বলৰ দিশ সলনি কৰিবলৈ
(D) increase the weight of a body পদাৰ্থৰ ওজন বঢ়াবলৈ
Answer: A) raise a load with less effort over a longer distance
A) বেছি দূৰত্বত কম প্ৰচেষ্টাৰে ভাৰ তোলিবলৈ
Explanation: The same work is spread over a longer path, so the force needed at any instant is smaller. The total work done is not reduced, only the effort.
একেই কাম দীঘল পথত বিতৰণ হয়, সেয়ে যিকোনো মুহূৰ্তত প্ৰয়োজনীয় বল কম। মুঠ কাম কম নহয়, কেবল প্ৰচেষ্টা।
Q10. A screw is a form of
স্ক্ৰু কিৰ এক ৰূপ
(A) an inclined plane wrapped around a cylinder চুঙাৰ চাৰিওফালে মেৰিওৱা নত সমতল
(B) a lever of the second class দ্বিতীয় শ্ৰেণীৰ লিভাৰ
(C) a movable pulley চলন্ত কপাৰি
(D) a wheel and axle only কেৱল চকা আৰু অক্ষ
Answer: A) an inclined plane wrapped around a cylinder
A) চুঙাৰ চাৰিওফালে মেৰিওৱা নত সমতল
Explanation: The thread of a screw is an inclined plane wound round a shaft, so a small effort over many turns lifts a heavy load a short distance.
স্ক্ৰুৰ পাক নত সমতল যি দণ্ডৰ চাৰিওফালে মেৰিওৱা, সেয়ে বহু পাকত সৰু প্ৰচেষ্টাই ভাৰ কম দূৰত্বত তোলে।
Q11. The velocity ratio of a machine is the ratio of
যন্ত্ৰৰ বেগ অনুপাত কিৰ অনুপাত
(A) distance moved by effort to distance moved by load প্ৰচেষ্টাই যোৱা দূৰত্ব ভাৰে যোৱা দূৰত্বলৈ
(B) load to effort ভাৰ প্ৰচেষ্টালৈ
(C) work output to work input কাম উৎপাদ কাম প্ৰদানলৈ
(D) time to distance সময় দূৰত্বলৈ
Answer: A) distance moved by effort to distance moved by load
A) প্ৰচেষ্টাই যোৱা দূৰত্ব ভাৰে যোৱা দূৰত্বলৈ
Explanation: Velocity ratio compares the distances moved, not the forces. Load over effort is mechanical advantage and work output over input is efficiency.
বেগ অনুপাতে দূৰত্বৰ তুলনা কৰে, বলৰ নহয়। ভাৰ ভাগ প্ৰচেষ্টা যান্ত্ৰিক লাভ আৰু কাম উৎপাদ ভাগ প্ৰদান দক্ষতা।
Q12. The pivot point about which a lever turns is called the
লিভাৰে ঘূৰা বিন্দুটোক কি বোলা হয়
(A) fulcrum আলম্ব
(B) load ভাৰ
(C) effort প্ৰচেষ্টা
(D) axis of rotation only কেৱল ঘূৰ্ণন অক্ষ
Answer: A) fulcrum
A) আলম্ব
Explanation: The fulcrum is the fixed point on which the lever rests and turns. The load and effort are the forces on either side.
আলম্ব সেই স্থিৰ বিন্দু যত লিভাৰ ৰয় আৰু ঘূৰে। ভাৰ আৰু প্ৰচেষ্টা দুয়োফালৰ বল।
Q13. A steering wheel of a car works as a
গাড়ীৰ ষ্টিয়াৰিং চকা কি হিচাপে কাম কৰে
(A) wheel and axle চকা আৰু অক্ষ
(B) single fixed pulley একক স্থিৰ কপাৰি
(C) inclined plane নত সমতল
(D) wedge কীলক
Answer: A) wheel and axle
A) চকা আৰু অক্ষ
Explanation: The large wheel turns a small axle, so a small effort at the rim produces a larger turning effect on the shaft. That is a wheel and axle.
ডাঙৰ চকাই সৰু অক্ষ ঘূৰায়, সেয়ে প্ৰান্তত সৰু প্ৰচেষ্টাই দণ্ডত ডাঙৰ ঘূৰ্ণন প্ৰভাৱ দিয়ে। সেয়া চকা আৰু অক্ষ।
Q14. A wedge is a simple machine that is used to
কীলক এটা সৰল যন্ত্ৰ যি কিৰ বাবে ব্যৱহৃত হয়
(A) split or cut materials apart পদাৰ্থ ফালি বা কাটিবলৈ
(B) lift water from a well কুঁৱাৰপৰা পানী তুলিবলৈ
(C) change the direction of a force বলৰ দিশ সলনি কৰিবলৈ
(D) measure force বল জুখিবলৈ
Answer: A) split or cut materials apart
A) পদাৰ্থ ফালি বা কাটিবলৈ
Explanation: A wedge is two inclined planes back to back, so driving it in pushes the material apart. An axe and a knife are wedges.
কীলক দুটা নত সমতল পিঠি-পিঠি, সেয়ে সোমালে পদাৰ্থ ফাটি যায়। কুঠাৰ আৰু ছুৰী কীলক।
Q15. The mechanical advantage of a machine that lifts a load of 200 N with an effort of 50 N is
৫০ নিউটন প্ৰচেষ্টাৰে ২০০ নিউটন ভাৰ তোলা যন্ত্ৰৰ যান্ত্ৰিক লাভ
(A) 4 ৪
(B) 0.25 ০.২৫
(C) 250 ২৫০
(D) 2 ২
Answer: A) 4
A) ৪
Explanation: Mechanical advantage is load over effort, so 200 divided by 50 gives 4. The reciprocal 0.25 would be the case if effort exceeded load.
যান্ত্ৰিক লাভ ভাৰ ভাগ প্ৰচেষ্টা, সেয়ে ২০০ ভাগ ৫০ = ৪। ০.২৫ হ'ল হেতেন যদি প্ৰচেষ্টা ভাৰতকৈ বেছি হয়।
Q16. In a lever of the second class the
দ্বিতীয় শ্ৰেণীৰ লিভাৰত
(A) load lies between the fulcrum and the effort ভাৰ আলম্ব আৰু প্ৰচেষ্টাৰ মাজত থাকে
(B) effort lies between the fulcrum and the load প্ৰচেষ্টা আলম্ব আৰু ভাৰৰ মাজত থাকে
(C) fulcrum lies between the load and effort আলম্ব ভাৰ আৰু প্ৰচেষ্টাৰ মাজত থাকে
(D) load and effort act at the same point ভাৰ আৰু প্ৰচেষ্টা একেই বিন্দুত কাম কৰে
Answer: A) load lies between the fulcrum and the effort
A) ভাৰ আলম্ব আৰু প্ৰচেষ্টাৰ মাজত থাকে
Explanation: Second class levers always give a mechanical advantage above one because the load is closer to the fulcrum than the effort. A nutcracker is an example.
দ্বিতীয় শ্ৰেণীৰ লিভাৰৰ যান্ত্ৰিক লাভ সদায় একৰ ওপৰত কাৰণ ভাৰ প্ৰচেষ্টাতকৈ আলম্বৰ ওচৰত। নাৰিকল ফটা যন্ত্ৰ উদাহৰণ।
Q17. Which of the following is a lever of the first class?
তলৰ কোনটো প্ৰথম শ্ৰেণীৰ লিভাৰ
(A) a pair of scissors কেঁচি
(B) a wheelbarrow ঠেলা গাড়ী
(C) a pair of tongs চিমটা
(D) a fishing rod মাছ ধৰা বাঁহ
Answer: A) a pair of scissors
A) কেঁচি
Explanation: In scissors the pivot is between the blades and the handles, so the fulcrum is in the middle. A wheelbarrow is second class and tongs third class.
কেঁচিত কব্জা ব্লেড আৰু হাতলৰ মাজত, সেয়ে আলম্ব মাজত। ঠেলা গাড়ী দ্বিতীয় আৰু চিমটা তৃতীয় শ্ৰেণী।
Q18. A machine has a velocity ratio of 5 and an efficiency of 80 percent. Its mechanical advantage is
যন্ত্ৰ এটাৰ বেগ অনুপাত ৫ আৰু দক্ষতা ৮০ শতাংশ। ইয়াৰ যান্ত্ৰিক লাভ
(A) 4 ৪
(B) 6.25 ৬.২৫
(C) 5 ৫
(D) 0.8 ০.৮
Answer: A) 4
A) ৪
Explanation: Efficiency is mechanical advantage divided by velocity ratio, so mechanical advantage is 0.8 times 5, that is 4. Multiplying instead gives the wrong 6.25.
দক্ষতা যান্ত্ৰিক লাভ ভাগ বেগ অনুপাত, সেয়ে যান্ত্ৰিক লাভ ০.৮ গুণ ৫ = ৪। ভুলকৈ পূৰণ কৰিলে ৬.২৫ হয়।
Q19. A pulley system with three pulleys in a block and tackle can lift a load with an effort of
তিনি কপাৰিৰ ব্লক আৰু টেকলত ভাৰ তোলাৰ প্ৰচেষ্টা প্ৰায়
(A) one third of the load, if friction is ignored ঘৰ্ষণ উপেক্ষা কৰিলে ভাৰৰ এক তৃতীয়াংশ
(B) the whole load সম্পূৰ্ণ ভাৰ
(C) twice the load ভাৰৰ দুগুণ
(D) half the load always সদায় ভাৰৰ আধা
Answer: A) one third of the load, if friction is ignored
A) ঘৰ্ষণ উপেক্ষা কৰিলে ভাৰৰ এক তৃতীয়াংশ
Explanation: Three supporting rope segments share the load, so the effort is about one third. Friction raises the actual effort above this ideal figure.
তিনিটা সহায়ক ৰছাৰ অংশে ভাৰ ভাগ কৰে, সেয়ে প্ৰচেষ্টা প্ৰায় এক তৃতীয়াংশ। ঘৰ্ষণে প্ৰকৃত প্ৰচেষ্টা এই আদৰ্শ মানতকৈ বঢ়ায়।
Q20. The work done by a machine equals
যন্ত্ৰই কৰা কাম কিৰ সমান
(A) load multiplied by the distance the load moves ভাৰ গুণ ভাৰে যোৱা দূৰত্ব
(B) effort multiplied by the distance the effort moves প্ৰচেষ্টা গুণ প্ৰচেষ্টাই যোৱা দূৰত্ব
(C) load multiplied by effort ভাৰ গুণ প্ৰচেষ্টা
(D) velocity ratio multiplied by efficiency বেগ অনুপাত গুণ দক্ষতা
Answer: A) load multiplied by the distance the load moves
A) ভাৰ গুণ ভাৰে যোৱা দূৰত্ব
Explanation: Useful work output is the load times the distance it is raised. Effort times effort distance is the work input, which is always larger.
উপযোগী কাম উৎপাদ ভাৰ গুণ ইয়াৰ ওঠা দূৰত্ব। প্ৰচেষ্টা গুণ প্ৰচেষ্টাৰ দূৰত্ব কাম প্ৰদান, যি সদায় বেছি।
Q21. An ideal machine has an efficiency of
আদৰ্শ যন্ত্ৰৰ দক্ষতা
(A) 100 percent ১০০ শতাংশ
(B) 50 percent ৫০ শতাংশ
(C) 0 percent ০ শতাংশ
(D) more than 100 percent ১০০ শতাংশতকৈ বেছি
Answer: A) 100 percent
A) ১০০ শতাংশ
Explanation: With no friction all the work input appears as work output, so efficiency is one hundred percent. No real machine reaches this.
ঘৰ্ষণ নাথাকিলে সকলো কাম প্ৰদান কাম উৎপাদ হিচাপে ওলায়, সেয়ে দক্ষতা এশ শতাংশ। কোনো প্ৰকৃত যন্ত্ৰই ইয়াক নাপায়।
Q22. The load in a lever is the
লিভাৰত ভাৰ হ'ল
(A) resistance that has to be overcome যি বাধা অতিক্ৰম কৰিব লাগে
(B) force applied by the user ব্যৱহাৰকাৰীয়ে প্ৰয়োগ কৰা বল
(C) fixed point of turning ঘূৰাৰ স্থিৰ বিন্দু
(D) distance from the fulcrum আলম্বৰপৰা দূৰত্ব
Answer: A) resistance that has to be overcome
A) যি বাধা অতিক্ৰম কৰিব লাগে
Explanation: The load is the weight or resistance the machine is meant to move, while the effort is what you apply. The fulcrum is the turning point.
ভাৰ সেই ওজন বা বাধা যি যন্ত্ৰই লৰাব লাগে, আনহাতে প্ৰচেষ্টা আপুনি প্ৰয়োগ কৰা। আলম্ব ঘূৰাৰ বিন্দু।
Q23. A crowbar used to lift a heavy stone works as a lever of the
গধুৰ শিল তোলাৰ কাউবাৰ কি শ্ৰেণীৰ লিভাৰ
(A) first class প্ৰথম শ্ৰেণী
(B) second class দ্বিতীয় শ্ৰেণী
(C) third class তৃতীয় শ্ৰেণী
(D) none of these এটাও নহয়
Answer: A) first class
A) প্ৰথম শ্ৰেণী
Explanation: The bar rests on a stone or block that acts as the fulcrum between the load at one end and the effort at the other, so it is first class.
দণ্ড এটা শিল বা খণ্ডত ৰয় যি আলম্ব, এমূৰে ভাৰ আৰু আনমূৰে প্ৰচেষ্টা, সেয়ে প্ৰথম শ্ৰেণী।
Q24. If the effort arm of a lever is made longer, the effort needed to lift a given load
লিভাৰৰ প্ৰচেষ্টা বাহু দীঘল কৰিলে নিৰ্দিষ্ট ভাৰ তোলাৰ প্ৰচেষ্টা
(A) decreases কমে
(B) increases বাঢ়ে
(C) stays the same একেই ৰয়
(D) becomes zero শূন্য হয়
Answer: A) decreases
A) কমে
Explanation: The turning effect is effort times effort arm, so a longer arm needs a smaller effort for the same moment. Shortening the arm would increase it.
ঘূৰ্ণন প্ৰভাৱ প্ৰচেষ্টা গুণ প্ৰচেষ্টা বাহু, সেয়ে দীঘল বাহুৱে একেই ভ্ৰামকত কম প্ৰচেষ্টা বিচাৰে। চুটি কৰিলে বাঢ়ে।
Q25. The principle of moments states that for a body in equilibrium
ভ্ৰামক নীতিয়ে কয় যে সাম্যাৱস্থাত থকা বস্তুৰ
(A) total clockwise moment equals total anticlockwise moment মুঠ ঘড়ীৰ দিশৰ ভ্ৰামক মুঠ বিপৰীত ভ্ৰামকৰ সমান
(B) total force is maximum মুঠ বল সৰ্বোচ্চ
(C) total load equals total effort মুঠ ভাৰ মুঠ প্ৰচেষ্টাৰ সমান
(D) velocity is zero only কেৱল বেগ শূন্য
Answer: A) total clockwise moment equals total anticlockwise moment
A) মুঠ ঘড়ীৰ দিশৰ ভ্ৰামক মুঠ বিপৰীত ভ্ৰামকৰ সমান
Explanation: Balance requires the turning effects in opposite directions to cancel, so the two total moments are equal. Equal load and effort is not required.
ভাৰসাম্যৰ বাবে বিপৰীত দিশৰ ঘূৰ্ণন প্ৰভাৱ বাতিল হ'ব লাগে, সেয়ে দুই মুঠ ভ্ৰামক সমান। ভাৰ আৰু প্ৰচেষ্টা সমান হোৱা নালাগে।
Q26. A movable pulley used with a fixed pulley gives a mechanical advantage of
স্থিৰ কপাৰিৰ সৈতে ব্যৱহৃত চলন্ত কপাৰিৰ যান্ত্ৰিক লাভ
(A) 2 ২
(B) 1 ১
(C) 4 ৪
(D) 0.5 ০.৫
Answer: A) 2
A) ২
Explanation: The movable pulley halves the effort and the fixed one only redirects it, so the combination gives a mechanical advantage of two.
চলন্ত কপাৰিয়ে প্ৰচেষ্টা আধা কৰে আৰু স্থিৰে কেবল দিশ সলায়, সেয়ে সংযোগে যান্ত্ৰিক লাভ দুই দিয়ে।
Q27. Which simple machine is used in a flour mill to transmit motion between two shafts?
আটা কলত দুটা দণ্ডৰ মাজত গতি সঞ্চাৰ কৰিবলৈ কোনটো সৰল যন্ত্ৰ ব্যৱহৃত হয়
(A) a wheel and axle with a belt বেল্টযুক্ত চকা আৰু অক্ষ
(B) a wedge কীলক
(C) an inclined plane নত সমতল
(D) a screw jack স্ক্ৰু জেক
Answer: A) a wheel and axle with a belt
A) বেল্টযুক্ত চকা আৰু অক্ষ
Explanation: A belt over two wheels and axles carries rotation from the driving shaft to the driven one. Wedges and inclined planes do not transmit motion.
দুটা চকা-অক্ষৰ ওপৰত বেল্টে ঘূৰ্ণন চলক দণ্ডৰপৰা চলিত দণ্ডলৈ নিয়ে। কীলক আৰু নত সমতলে গতি সঞ্চাৰ নকৰে।
Q28. The efficiency of a machine can be increased by
যন্ত্ৰৰ দক্ষতা কিৰে বঢ়োৱা যায়
(A) lubricating its moving parts চলন্ত অংশ লিউব্ৰিকেট কৰি
(B) increasing the load beyond its limit সীমাৰ বাহিৰে ভাৰ বঢ়াই
(C) reducing the length of the effort arm প্ৰচেষ্টা বাহুৰ দৈৰ্ঘ্য কমাই
(D) removing the fulcrum আলম্ব আঁতৰাই
Answer: A) lubricating its moving parts
A) চলন্ত অংশ লিউব্ৰিকেট কৰি
Explanation: Lubrication cuts friction, so less of the work input is wasted and efficiency rises. Overloading increases friction and wear instead.
লিউব্ৰিকেশনে ঘৰ্ষণ কমায়, সেয়ে কম কাম নষ্ট হয় আৰু দক্ষতা বাঢ়ে। অতি ভাৰে ঘৰ্ষণ আৰু ক্ষয় বঢ়ায়।
Q29. A screw jack is used to
স্ক্ৰু জেকে কিৰ বাবে ব্যৱহৃত হয়
(A) lift a heavy vehicle with a small effort সৰু প্ৰচেষ্টাৰে গধুৰ যান তোলিবলৈ
(B) cut wood into pieces কাঠ টুকুৰা কৰিবলৈ
(C) measure atmospheric pressure বায়ুমণ্ডলীয় চাপ জুখিবলৈ
(D) change AC into DC AC ক DC লৈ সলনি কৰিবলৈ
Answer: A) lift a heavy vehicle with a small effort
A) সৰু প্ৰচেষ্টাৰে গধুৰ যান তোলিবলৈ
Explanation: The screw jack turns a threaded shaft inside a nut, and the inclined plane of the thread gives a very large force gain, enough to raise a car.
স্ক্ৰু জেকে নাটৰ ভিতৰত পাকযুক্ত দণ্ড ঘূৰায়, আৰু পাকৰ নত সমতলে অতিশয় বল লাভ দিয়ে, গাড়ী তোলাৰ বাবে যথেষ্ট।
Q30. The mechanical advantage of a machine is less than its velocity ratio because
যন্ত্ৰৰ যান্ত্ৰিক লাভ বেগ অনুপাততকৈ কম কাৰণ
(A) some effort is used to overcome friction কিছু প্ৰচেষ্টা ঘৰ্ষণ নিবাৰণত ব্যৱহৃত হয়
(B) the load is too light ভাৰ অতি পাতল
(C) gravity acts upwards মহাকৰ্ষণ ওপৰলৈ কাম কৰে
(D) the machine is ideal যন্ত্ৰ আদৰ্শ
Answer: A) some effort is used to overcome friction
A) কিছু প্ৰচেষ্টা ঘৰ্ষণ নিবাৰণত ব্যৱহৃত হয়
Explanation: Friction at the moving parts absorbs part of the effort, so the useful load lifted is smaller than the velocity ratio predicts.
চলন্ত অংশৰ ঘৰ্ষণে প্ৰচেষ্টাৰ অংশ শোষে, সেয়ে উঠোৱা উপযোগী ভাৰ বেগ অনুপাতে কোৱাতকৈ কম।

Technical / Science for the DHS & DME Technical Grade III examination. The questions and explanations follow the patterns used in recent Assam recruitment papers, and each topic is written so that the method can be reproduced in the examination hall.

Author: axomexam teamReviewed by: Axomexam Editorial TeamSources: NCERT and standard science reference material and online resourcesPublished: 8 November 2026Last updated: 8 November 2026How we review

DHS & DME Technical Grade III পৰীক্ষাৰ কাৰিকৰী / বিজ্ঞান। প্ৰশ্ন আৰু ব্যাখ্যাবোৰ শেহতীয়া অসম নিয়োগ পত্ৰত ব্যৱহৃত আৰ্হি অনুসৰি প্ৰস্তুত, আৰু প্ৰতিটো অধ্যায় এনে ধৰণে লিখা হৈছে যাতে পৰীক্ষা কক্ষত পদ্ধতিটো পুনৰ উলিয়াব পাৰি।

লেখক: axomexam টীমপৰ্যালোচনা: Axomexam Editorial Teamপ্ৰসংগ উৎস: মানক প্ৰসংগ পুথি আৰু বিশ্বাসযোগ্য অনলাইন উৎসপ্ৰকাশিত: 8 নৱেম্বৰ 2026শেহতীয়া আপডেট: 8 নৱেম্বৰ 2026