Number Series & Alphabet Series
A number series question gives a row of numbers that follow a hidden rule, and the candidate must find the next number, the missing number, or the wrong number. The rule is always simple once it is seen, and the whole chapter rewards a candidate who looks at the differences between neighbouring terms before trying anything else. Almost every series in the ADRE Grade III paper can be opened by asking what happens from one term to the next.
The first step is to write the differences below the terms. If the differences are equal, the series is an arithmetic progression and the next term is found by adding the common difference again. If the differences themselves form a simple pattern, such as increasing by one each time or doubling, the series is a second-order series and the next difference must be found before the next term. Writing the differences on paper turns a confusing row of numbers into a clear instruction.
If the differences do not help, look at the ratios. A series in which each term is a fixed multiple of the one before is a geometric progression. Powers and squares appear often: the series may be the squares of the counting numbers, the cubes, or those numbers with one added or subtracted. A candidate who has memorised the squares up to thirty, the cubes up to fifteen and the powers of two up to ten recognises these rows at a glance and saves several minutes.
Many series are built by alternating two rules, one for the odd places and another for the even places. In the row three, seven, six, fourteen, twelve the odd places are multiplied by two and the even places are increased by five, so the two rules must be read separately. When a single difference pattern fails, the next thing to try is to split the series into odd-placed and even-placed terms and to treat each as its own series.
Prime numbers, factorials and the addition of the previous two terms are also common. A series that reads one, two, three, five, eight, thirteen is the Fibonacci pattern, in which each term is the sum of the two before it. A series that reads one, two, six, twenty-four is the factorials. A series of primes such as two, three, five, seven, eleven is recognised by the absence of even numbers and by the gaps of one and two that primes leave.
Alphabet series work in the same way, except that the place values of the letters are the numbers. The letter A is one, B is two and Z is twenty-six, and a candidate should be able to move between a letter and its place value without counting on the fingers. A series such as C, F, I, L advances by three letters each time, and one such as A, C, F, J advances by two, then three, then four, so the differences of the place values tell the rule.
In a mixed or alpha-numeric series the letters and the numbers may follow separate rules that run side by side. The letters may advance by one place while the numbers double, or the letters may move forward and the numbers move backward. The safe method is to write the two rows separately, one under the other, and to find the rule of each row on its own before joining them again.
The wrong-number series deserves a separate word. Here every term except one follows the rule, and the candidate must find the intruder. The method is the same as before: find the rule that most of the terms obey, and then test each term against it. The term that breaks the rule is the answer, and it is often the term at which the differences first stop being regular.
A short list of standard rows should be memorised because they appear again and again. These include the squares, the cubes, the powers of two and three, the triangular numbers one, three, six, ten and fifteen, the prime numbers, and the factorials. Knowing them by heart means that a series can be matched against the list before any calculation is attempted, which is much faster and much safer in the examination hall.
Finally, practise the habit of checking the answer against the rule. Once a rule has been guessed, apply it to two or three pairs of terms to be sure that it holds everywhere, and only then choose the option. A rule that fits the first pair but fails the third is a trap, and the few seconds spent on the check are the best investment a candidate can make in this chapter.
One family of series is built on the multiplication and division of a fixed number, with a small addition or subtraction at each step. The row two, five, eleven, twenty-three, forty-seven is made by doubling and adding one, so the rule is not a pure geometric progression but a geometric progression with a twist. When the ratios between terms are close to a constant but not exactly equal, the candidate should look for a multiplier and a constant added or subtracted, and should test the guess on two pairs before using it.
Subtraction series behave in the same way as addition series but in the opposite direction, and a candidate should not be thrown by a row that falls. The row one hundred, ninety, eighty-one, seventy-three falls by ten, then nine, then eight, so the differences themselves fall by one, and the next fall is seven. Treating the falling row exactly like a rising one, by writing the differences, gives the answer without any special method.
Mixed operations often appear in the harder questions. A series may multiply by two and then add three, then multiply by two and add three again, so that the operations alternate in a fixed pair. Another may square the term and subtract one. The safe approach is to write both the difference and the ratio beside each pair of terms; whichever of the two shows a clean pattern is the rule that the examiner intended.
Another common construction is the addition of two previous terms, or of a previous term and a growing number. The row one, one, two, three, five, eight adds the two before it, and the row one, three, six, ten, fifteen adds the counting numbers one by one. These rows look irregular if the candidate only looks at the differences, but they become obvious once the previous two terms are added on paper.
Series that mix squares and cubes with a constant deserve attention because they appear in the Grade III paper. The row two, five, ten, seventeen, twenty-six is the squares of the counting numbers plus one, and the row zero, seven, twenty-six, sixty-three is the cubes minus one. Recognising the squares and cubes inside the row is much faster than searching for a difference pattern, and it is the reason the standard rows should be memorised.
For alphabet series that move by a growing step, the place values must be written above the letters before any rule is guessed. A row such as A, B, D, G, K advances by one, then two, then three, then four, so the differences of the place values grow by one, exactly as in a number series. Writing the place values turns the alphabet question into a number question and lets the same methods be used.
A reverse alphabet series moves towards A rather than away from it. The row Z, X, U, Q advances by two, then three, then four towards the left, and the candidate must read the direction carefully. A series that changes direction in the middle, such as moving right for two terms and then left for two, is rare but possible, and it is detected by writing the place values and watching the sign of the difference.
It helps to keep a personal list of the series that have appeared in previous papers and to review it before the examination. The examiner often repeats a favourite construction with different numbers, so a candidate who has seen the squares-plus-one row once will recognise it at a glance the second time. The list need not be long; a page of constructions with one example each is enough.
Timing matters in this chapter. Each series question should take no more than forty or fifty seconds. If the rule has not appeared after the differences and the ratios have both been tried, the candidate should move on and return later rather than spending three minutes on one mark. The habit of moving on protects the rest of the paper, and a fresh look often reveals the rule that was hidden at first.
Finally, remember that a series question always has exactly one answer that fits a simple rule. If two options both seem to fit, the rule has probably been guessed wrongly, and the candidate should go back to the differences or the ratios. The examiner never sets a series with two valid rules, so an apparent clash is a signal to re-examine the working rather than to choose at random.
- Write the differences under the terms before trying any other rule.
- Equal differences mean an arithmetic series; regular differences mean a second-order series.
- Fixed ratios mean a geometric series; look for squares, cubes and powers.
- If one pattern fails, split the series into odd-placed and even-placed terms.
- Memorise squares up to thirty, cubes up to fifteen and powers of two up to ten.
- For a wrong-number series, find the rule that most terms obey and test each term.
- When ratios are nearly constant, look for a multiplier with a constant added or subtracted.
- Treat a falling series exactly like a rising one by writing the differences.
- If two options seem to fit, the rule is wrong; re-check the differences and ratios.
- Spend no more than about fifty seconds on a single series question.
Frequently Asked Questions
What is the first thing to do in a number series question?
Write the differences between neighbouring terms. If they are equal the series is arithmetic, and if they form a pattern the series is second-order.
How do I handle a series that alternates two rules?
Split it into the odd-placed terms and the even-placed terms, find the rule of each on its own, and then join them again.
Which standard rows should I memorise?
The squares up to thirty, the cubes up to fifteen, the powers of two and three, the triangular numbers and the factorials.
What should I do if the difference pattern does not work?
Look at the ratios for a fixed multiplier, and check the standard rows such as the squares, cubes and powers of two.
How long should one series question take?
About forty to fifty seconds. If no rule appears, move on and return later rather than spending minutes on one mark.