A figure classification question gives a set of figures that share a common property and asks for the one that does not belong, or gives a set of figures and asks which one is like the others. The chapter depends on finding the property that most of the figures share and then testing each figure against it. A candidate who names the property before looking at the figures will answer quickly.
The property may be the number of sides of the outer shape, such as four sides in most of the figures and five in one. The candidate should count the sides of each figure and should find the one that differs. Counting on paper, rather than by eye, is the safe method, because two shapes that look alike may have different numbers of sides.
The property may be the number of parts inside the figure, such as three dots in most of the figures and four in one. The candidate should count the parts in each figure and should find the one that differs. A part may be a dot, a line or a small shape, and the candidate should count all of them.
The property may be the symmetry of the figure, such as a vertical line of symmetry in most of the figures and none in one. The candidate should test each figure for the line of symmetry, and should find the one that lacks it. A figure may be symmetric about a vertical line, a horizontal line or both, and the candidate should test the kind of symmetry that the others share.
The property may be the shading, such as a shaded part in most of the figures and none in one. The candidate should look for the shaded part in each figure and should find the one that differs. A part may be fully shaded, half shaded or unshaded, and the candidate should read the shading carefully.
The property may be the relation between the parts, such as a dot inside a circle in most of the figures and a dot outside in one. The candidate should look at the position of each part and should find the one that differs. The relation of the parts is often the property, and the candidate should not miss it while counting.
The candidate should be careful with a figure that shares some of the properties but not all. Such a figure may be the odd one, or it may be the one that is like the others, depending on the question. The candidate should read the question for what it asks, and should test the figures against the property that most of them share.
A useful method is to write the number of each property beside each figure, such as the number of sides, the number of parts and the number of shaded parts, and to look for the one that differs. Writing the numbers turns the figure question into a comparison of numbers, and the candidate can then find the odd one quickly.
A useful check is to test the chosen figure against the property and to test the others as well. If the others share the property and the chosen one does not, the choice is right. The candidate should test all the figures, because a hasty choice may pick a figure that shares the property but differs in another way that the question does not ask about.
Finally, practise the chapter with a set of classifications, and write the number of each property beside each figure. Ten minutes of this practice makes the properties familiar, so that in the examination hall the odd one is found in a few seconds. The chapter is one of the quickest in the non-verbal paper, and the marks come reliably once the properties are at hand.
It helps to name the property in words before looking at the figures, and to write the number of each property beside each figure. A property such as four sides, or three parts, or one line of symmetry, can be written as a number, and the figure that differs is then found by comparing the numbers. The candidate should keep the property short and exact.
A useful question is which property all the figures share except one. If all the figures have four sides except one, that one is the odd one. If all the figures have a shaded part except one, that one is the odd one. The candidate should test the properties one at a time and should find the one that leaves a single figure outside.
The candidate should look for the common properties: the number of sides, the number of parts, the symmetry, the shading and the relation between the parts. These five properties cover most of the classifications in the Grade III paper, and the candidate should test them before looking for anything unusual.
The candidate should be careful with a figure that shares some of the properties but not all. Such a figure may be the odd one, or it may be the one that is like the others, depending on the question. The candidate should read the question for what it asks, and should test the figures against the property that most of them share.
A useful check is to test the chosen figure against the property and to test the others as well. If the others share the property and the chosen one does not, the choice is right. The candidate should test all the figures, because a hasty choice may pick a figure that shares the property but differs in another way that the question does not ask about.
A question may show the figures in a row and ask for the odd one, or may show the figures in a grid and ask which row or column differs. The method is the same, and the candidate should find the property from the figures that are given and should apply it to the odd one. The candidate should use all the given figures, because the property must fit all of them except one.
The candidate should also handle a figure that has a letter or a number in it, because the letter may be the property. A set of letters that are all symmetric about a vertical line has one letter that is not, and the candidate should find it. The candidate should test the symmetry of each letter as part of the figure.
A useful habit is to draw a small table with the figures along the top and the properties down the side, and to tick or cross each cell. The table makes the comparison visible and prevents the candidate from forgetting a property for a figure. The table is the whole method of the chapter, and a candidate who uses it will answer reliably.
The candidate should not be frightened by a figure that looks complex. A complex figure is usually made of two or three simple parts, and the candidate should count each part and should find the property that most of the figures share. Breaking the figure into parts is the whole method, and a candidate who does it will find even a complex classification easy.
Finally, practise the chapter with a set of classifications of each kind, and write the number of each property beside each figure. Ten minutes of this practice makes the properties familiar, so that in the examination hall the odd one is found in a few seconds. The chapter is one of the quickest in the non-verbal paper, and the marks come reliably once the properties are at hand.
A last point is about the kind of classification that turns on the number of enclosed regions. A figure may have one region, or two, or three, and the candidate should count the regions in each figure and should find the one that differs. Counting the regions is the same skill as counting the sides, and the candidate should write the number beside each figure and compare.
The candidate should also remember that a figure may share the property of the others in one respect and differ in another, and the candidate should find the respect that the question uses. The question is about the property that most of the figures share, and the candidate should test each property in turn and should choose the one that leaves a single figure outside. Testing the properties one at a time is the safe habit.
Name the property that most of the figures share before testing them.
Count the sides, the parts and the shaded parts on paper, not by eye.
Test the symmetry of each figure.
Write the number of each property beside each figure and look for the one that differs.
Test all the figures against the property, not just the chosen one.
Name the property in words and write the number of each property beside each figure.
Test the five common properties: sides, parts, symmetry, shading and the relation between parts.
Find the property that leaves exactly one figure outside.
Draw a table with the figures along the top and the properties down the side.
Test all the figures against the property, not just the chosen one.
Count the enclosed regions as well as the sides and the parts.
Test each property in turn and choose the one that leaves a single figure outside.
Frequently Asked Questions
What properties are used in figure classification?
The number of sides, the number of parts, the symmetry, the shading and the relation between the parts.
Why should I count on paper rather than by eye?
Because two shapes that look alike may have different numbers of sides, and the eye can be fooled.
Which properties should I test in figure classification?
The number of sides, the number of parts, the symmetry, the shading and the relation between the parts.
How do I make sure I have the right odd one?
Find the property that leaves exactly one figure outside, and test all the figures against it.
Can the number of enclosed regions be the property?
Yes. Count the regions in each figure and find the one that differs, just as with the sides.
চিত্ৰ শ্ৰেণীবিভাজন
চিত্ৰৰ শ্ৰেণীবদ্ধকৰণৰ প্ৰশ্নই এটা সাধাৰণ ধৰ্ম ভাগ কৰা চিত্ৰৰ এটা সমষ্টি দি নপৰা এটা বিচাৰে, বা চিত্ৰৰ এটা সমষ্টি দি কোনটো আনবোৰৰ দৰে সোধে। অধ্যায়টো বেছিভাগ চিত্ৰই ভাগ কৰা ধৰ্মটো বিচৰা আৰু তাৰ পিছত প্ৰতিটো চিত্ৰ তাক পৰীক্ষা কৰাৰ ওপৰত নিৰ্ভৰশীল। চিত্ৰবোৰ চোৱাৰ আগতে ধৰ্মটোৰ নাম লোৱা প্ৰাৰ্থীয়ে দ্ৰুত উত্তৰ দিব।
কিছুমান ধৰ্ম ভাগ কৰা কিন্তু সকলো নকৰা চিত্ৰৰ বিষয়ে প্ৰাৰ্থীয়ে সাৱধান হ'ব লাগে। এনে চিত্ৰ অমিলটো হ'ব পাৰে, বা প্ৰশ্নৰ ওপৰত নিৰ্ভৰ কৰি আনবোৰৰ দৰে থকাটো হ'ব পাৰে। প্ৰাৰ্থীয়ে প্ৰশ্নই কি সোধে সেয়া পঢ়া উচিত, আৰু বেছিভাগে ভাগ কৰা ধৰ্মৰ বিৰুদ্ধে চিত্ৰবোৰ পৰীক্ষা কৰা উচিত।
এটা উপযোগী পদ্ধতি হ'ল প্ৰতিটো চিত্ৰৰ কাষত প্ৰতিটো ধৰ্মৰ সংখ্যা, যেনে বাহুৰ সংখ্যা, অংশৰ সংখ্যা আৰু ছাঁ দিয়া অংশৰ সংখ্যা লিখি বেলেগটো বিচৰা। সংখ্যাবোৰ লিখিলে চিত্ৰৰ প্ৰশ্নটো সংখ্যাৰ তুলনালৈ ৰূপান্তৰিত হয়, আৰু প্ৰাৰ্থীয়ে তাৰ পিছত অমিলটো সোনকালে বিচাৰি পাব।
এটা উপযোগী পৰীক্ষা হ'ল বাছনি কৰা চিত্ৰটো ধৰ্মৰ বিৰুদ্ধে আৰু আনবোৰকো পৰীক্ষা কৰা। আনবোৰে ধৰ্মটো ভাগ কৰি বাছনি কৰাটোৱে নকৰিলে, বাছনিটো শুদ্ধ। প্ৰাৰ্থীয়ে সকলো চিত্ৰ পৰীক্ষা কৰা উচিত, কাৰণ খৰধৰ কৰা বাছনিয়ে ধৰ্মটো ভাগ কৰা কিন্তু প্ৰশ্নই নোসোধা আন এটা দিশত বেলেগ এটা চিত্ৰ বাছি ল'ব পাৰে।
শেষত, শ্ৰেণীবদ্ধকৰণৰ এটা সমষ্টিৰে অধ্যায়টো অভ্যাস কৰক, আৰু প্ৰতিটো চিত্ৰৰ কাষত প্ৰতিটো ধৰ্মৰ সংখ্যা লিখক। দহ মিনিটৰ এই অভ্যাসে ধৰ্মবোৰ চিনাকি কৰি তোলে, যাতে পৰীক্ষা কক্ষত অমিলটো কেইছেকেণ্ডত বিচাৰি পোৱা যায়। অধ্যায়টো অ-ভাষিক পত্ৰৰ আটাইতকৈ দ্ৰুতবোৰৰ এটা, আৰু ধৰ্মবোৰ হাতত থাকিলে নম্বৰবোৰ নিৰ্ভৰযোগ্যভাৱে আহে।
চিত্ৰবোৰ চোৱাৰ আগতে ধৰ্মটো শব্দত নাম লোৱাটো আৰু প্ৰতিটো চিত্ৰৰ কাষত প্ৰতিটো ধৰ্মৰ সংখ্যা লিখাটো সহায়ক। চাৰি বাহু, বা তিনি অংশ, বা এটা প্ৰতিসমতাৰ ৰেখা, দৰে এটা ধৰ্ম এটা সংখ্যা হিচাপে লিখিব পাৰি, আৰু বেলেগ চিত্ৰটো তাৰ পিছত সংখ্যাবোৰ তুলনা কৰি পোৱা যায়। প্ৰাৰ্থীয়ে ধৰ্মটো চুটি আৰু সঠিক ৰখা উচিত।
এটা উপযোগী প্ৰশ্ন হ'ল এটাৰ বাহিৰে সকলো চিত্ৰই কোনটো ধৰ্ম ভাগ কৰে। এটাৰ বাহিৰে সকলো চিত্ৰত চাৰি বাহু থাকিলে, সেয়া অমিলটো। এটাৰ বাহিৰে সকলো চিত্ৰত এটা ছাঁ দিয়া অংশ থাকিলে, সেয়া অমিলটো। প্ৰাৰ্থীয়ে ধৰ্মবোৰ এটা এটাকৈ পৰীক্ষা কৰি এটা চিত্ৰ বাহিৰত এৰি যোৱাটো বিচৰা উচিত।
কিছুমান ধৰ্ম ভাগ কৰা কিন্তু সকলো নকৰা চিত্ৰৰ বিষয়ে প্ৰাৰ্থীয়ে সাৱধান হ'ব লাগে। এনে চিত্ৰ অমিলটো হ'ব পাৰে, বা প্ৰশ্নৰ ওপৰত নিৰ্ভৰ কৰি আনবোৰৰ দৰে থকাটো হ'ব পাৰে। প্ৰাৰ্থীয়ে প্ৰশ্নই কি সোধে সেয়া পঢ়া উচিত, আৰু বেছিভাগে ভাগ কৰা ধৰ্মৰ বিৰুদ্ধে চিত্ৰবোৰ পৰীক্ষা কৰা উচিত।
এটা উপযোগী পৰীক্ষা হ'ল বাছনি কৰা চিত্ৰটো ধৰ্মৰ বিৰুদ্ধে আৰু আনবোৰকো পৰীক্ষা কৰা। আনবোৰে ধৰ্মটো ভাগ কৰি বাছনি কৰাটোৱে নকৰিলে, বাছনিটো শুদ্ধ। প্ৰাৰ্থীয়ে সকলো চিত্ৰ পৰীক্ষা কৰা উচিত, কাৰণ খৰধৰ কৰা বাছনিয়ে ধৰ্মটো ভাগ কৰা কিন্তু প্ৰশ্নই নোসোধা আন এটা দিশত বেলেগ এটা চিত্ৰ বাছি ল'ব পাৰে।
এটা প্ৰশ্নই চিত্ৰবোৰ এটা শাৰীত দেখুৱাই অমিলটো সোধে, বা চিত্ৰবোৰ এটা গ্ৰিডত দেখুৱাই কোন শাৰী বা স্তম্ভ বেলেগ সোধে। পদ্ধতি একেই, আৰু প্ৰাৰ্থীয়ে দিয়া চিত্ৰবোৰৰ পৰা ধৰ্মটো বিচাৰি অমিলটোত প্ৰয়োগ কৰা উচিত। ধৰ্মটোৱে এটাৰ বাহিৰে সকলোৰে সৈতে মিলিব লাগে বাবে প্ৰাৰ্থীয়ে দিয়া প্ৰতিটো চিত্ৰ ব্যৱহাৰ কৰা উচিত।
চিত্ৰত এটা আখৰ বা এটা সংখ্যা থকা চিত্ৰও প্ৰাৰ্থীয়ে চম্ভালিব লাগে, কাৰণ আখৰটোৱেই ধৰ্মটো হ'ব পাৰে। এটা লম্ব ৰেখাৰ বিষয়ে প্ৰতিসম আখৰৰ এটা সমষ্টিত এটা আখৰ নাই যি প্ৰতিসম, আৰু প্ৰাৰ্থীয়ে সেয়া বিচৰা উচিত। প্ৰাৰ্থীয়ে প্ৰতিটো আখৰৰ প্ৰতিসমতা চিত্ৰখনৰ অংশ হিচাপে পৰীক্ষা কৰা উচিত।
এটা উপযোগী অভ্যাস হ'ল ওপৰত চিত্ৰবোৰ আৰু পাৰত ধৰ্মবোৰ ৰখা এখন সৰু তালিকা বনাই প্ৰতিটো ঘৰত টিক বা ক্ৰছ দিয়া। তালিকাই তুলনাটো দৃশ্যমান কৰে আৰু প্ৰাৰ্থীয়ে এটা চিত্ৰৰ বাবে এটা ধৰ্ম পাহৰাৰ পৰা বচে। তালিকাখনেই অধ্যায়ৰ গোটেই পদ্ধতি, আৰু ইয়াক ব্যৱহাৰ কৰা প্ৰাৰ্থীয়ে নিৰ্ভৰযোগ্যভাৱে উত্তৰ দিব।
জটিল দেখা এটা চিত্ৰৰ পৰা প্ৰাৰ্থীয়ে ভয় খোৱা উচিত নহয়। এটা জটিল চিত্ৰ সাধাৰণতে দুটা বা তিনিটা সহজ অংশৰে বনোৱা, আৰু প্ৰাৰ্থীয়ে প্ৰতিটো অংশ গণনা কৰি বেছিভাগ চিত্ৰই ভাগ কৰা ধৰ্মটো বিচৰা উচিত। চিত্ৰখনক অংশত ভাঙাটোৱেই গোটেই পদ্ধতি, আৰু সেয়া কৰা প্ৰাৰ্থীয়ে জটিল শ্ৰেণীবদ্ধকৰণো সহজ পাব।
শেষত, প্ৰতিটো ধৰণৰ শ্ৰেণীবদ্ধকৰণৰ এটা সমষ্টিৰে অধ্যায়টো অভ্যাস কৰক, আৰু প্ৰতিটো চিত্ৰৰ কাষত প্ৰতিটো ধৰ্মৰ সংখ্যা লিখক। দহ মিনিটৰ এই অভ্যাসে ধৰ্মবোৰ চিনাকি কৰি তোলে, যাতে পৰীক্ষা কক্ষত অমিলটো কেইছেকেণ্ডত বিচাৰি পোৱা যায়। অধ্যায়টো অ-ভাষিক পত্ৰৰ আটাইতকৈ দ্ৰুতবোৰৰ এটা, আৰু ধৰ্মবোৰ হাতত থাকিলে নম্বৰবোৰ নিৰ্ভৰযোগ্যভাৱে আহে।
শেষত, আগুৰা অঞ্চলৰ সংখ্যাৰ ওপৰত নিৰ্ভৰ কৰা ধৰণৰ শ্ৰেণীবদ্ধকৰণৰ বিষয়ে এটা কথা। এটা চিত্ৰত এটা অঞ্চল, বা দুটা, বা তিনি থাকিব পাৰে, আৰু প্ৰাৰ্থীয়ে প্ৰতিটো চিত্ৰত অঞ্চলবোৰ গণনা কৰি বেলেগটো বিচৰা উচিত। অঞ্চল গণনা কৰা বাহু গণনা কৰাৰ দৰেই একেই দক্ষতা, আৰু প্ৰাৰ্থীয়ে প্ৰতিটো চিত্ৰৰ কাষত সংখ্যা লিখি তুলনা কৰা উচিত।
এটা চিত্ৰই এটা দিশত আনবোৰৰ ধৰ্ম ভাগ কৰি আন এটা দিশত বেলেগ হ'ব পাৰে, আৰু প্ৰাৰ্থীয়ে প্ৰশ্নই ব্যৱহাৰ কৰা দিশটো বিচৰা উচিত, সেয়াও প্ৰাৰ্থীয়ে মনত ৰখা উচিত। প্ৰশ্নটো বেছিভাগ চিত্ৰই ভাগ কৰা ধৰ্মটোৰ বিষয়ে, আৰু প্ৰাৰ্থীয়ে প্ৰতিটো ধৰ্ম এটা এটাকৈ পৰীক্ষা কৰি এটা চিত্ৰ বাহিৰত এৰি যোৱাটো বাছনি কৰা উচিত। ধৰ্মবোৰ এটা এটাকৈ পৰীক্ষা কৰাটো সুৰক্ষিত অভ্যাস।
চিত্ৰ শ্ৰেণীবিভাজনৰ প্ৰশ্নত এটা গোটৰ চিত্ৰবোৰৰ মাজৰ সাধাৰণ ধৰ্ম বিচাৰি সেই ধৰ্ম নথকা চিত্ৰটো বাছনি কৰিব লাগে। সাধাৰণ ধৰ্ম হ'ব পাৰে ৰেখাৰ সংখ্যা, বন্ধ বা মুকলি আকৃতি, ভিতৰত বা বাহিৰত বিন্দু, বা আকৃতিৰ প্ৰতিসমতা। প্ৰথমে প্ৰতিটো চিত্ৰৰ সাধাৰণ বৈশিষ্ট্য তালিকাভুক্ত কৰিব লাগে।
বেছিভাগ চিত্ৰৰ মাজত এটা সাধাৰণ ধৰ্ম থাকে, আৰু এটা চিত্ৰই সেই ধৰ্ম ভঙ্গ কৰে। যেতিয়া দুটা বা ততোধিক ধৰ্ম সম্ভৱ হয়, তেতিয়া আটাইতকৈ সৰল আৰু স্পষ্ট ধৰ্মটো বাছনি কৰিব লাগে। এই প্ৰশ্নত অতি সূক্ষ্ম পাৰ্থক্যৰ ওপৰত গুৰুত্ব দিয়া হয়।
অনুশীলনৰ জৰিয়তে সাধাৰণ ধৰ্মবোৰ চিনি পোৱা সহজ হয়। ৰেখাৰ সংখ্যা, বিন্দুৰ অৱস্থান, আৰু আকৃতিৰ প্ৰতিসমতা — এই তিনিটা দিশত প্ৰথমে চোৱাটো উপযোগী। এনে পদ্ধতিয়ে সময় সাঁচে আৰু ভুল কমায়।
চিত্ৰবোৰ পৰীক্ষা কৰাৰ আগতে বেছিভাগে ভাগ কৰা ধৰ্মটোৰ নাম লওক।
বাহু, অংশ আৰু ছাঁ দিয়া অংশ চকুৰে নহয়, কাগজত গণনা কৰক।
প্ৰতিটো চিত্ৰৰ প্ৰতিসমতা পৰীক্ষা কৰক।
প্ৰতিটো চিত্ৰৰ কাষত প্ৰতিটো ধৰ্মৰ সংখ্যা লিখি বেলেগটো বিচাৰক।
ঠিক এটা চিত্ৰ বাহিৰত এৰি যোৱা ধৰ্মটো বিচাৰক, আৰু তাৰ বিৰুদ্ধে সকলো চিত্ৰ পৰীক্ষা কৰক।
আগুৰা অঞ্চলৰ সংখ্যা ধৰ্মটো হ'ব পাৰে নেকি?
হয়। প্ৰতিটো চিত্ৰত অঞ্চলবোৰ গণনা কৰি বেলেগটো বিচাৰক, বাহুৰ দৰেই।
Reasoning & Mental Ability for the ADRE 3.0 Grade III examination. The questions and explanations follow the patterns used in recent Assam recruitment papers, and each topic is written so that the method can be reproduced in the examination hall.