Time, Speed and Distance
Time, speed and distance is one of the most practical chapters of the ADRE Grade III General Mathematics paper, and it is tested through short problems about trains, boats, walks and journeys. The whole chapter grows from one relation: distance equals speed times time. From this single relation every other formula in the chapter can be built, so a candidate who understands it thoroughly needs to memorise very little.
The three quantities must be kept in consistent units. If the speed is in kilometres per hour, the time must be in hours and the distance in kilometres. If the time is given in minutes, it must be converted to hours before being used, and if it is given in seconds, it must be converted as well. A speed of one metre per second is equal to three point six kilometres per hour, and this conversion appears in almost every train question, so it must be automatic.
The three rearrangements of the main relation are worth writing down. Speed is distance divided by time, time is distance divided by speed, and distance is speed times time. Nearly every question in the paper is only asking for one of these three, with the numbers dressed in the language of a journey. Reading the question and identifying which of the three is wanted is the first step, and writing down the units is the second.
Trains and poles give a family of questions with a small twist. A train crossing a pole or a man covers only its own length, so the time taken is the length of the train divided by its speed. A train crossing a platform, a bridge or another train covers its own length plus the length of the platform or the other train, so the time taken is the sum of the lengths divided by the relative speed. The distinction between crossing a pole and crossing a platform is the source of most mistakes in this part of the chapter.
Two trains moving in opposite directions approach each other with a relative speed equal to the sum of their speeds, and two trains moving in the same direction have a relative speed equal to the difference of their speeds. When the question asks how long the two trains take to cross each other, the distance covered is the sum of their lengths and the speed used is the relative speed. Writing the relative speed correctly is the whole art of these questions.
Boats and streams introduce two more quantities. The speed of the boat in still water is the speed the boat would have with no current, the speed of the stream is the speed of the current, the downstream speed is the sum of the two, and the upstream speed is the difference of the two. From these relations the speed of the boat in still water is half the sum of the downstream and upstream speeds, and the speed of the stream is half their difference. These two formulas answer most boat questions at once.
Average speed is a common trap. The average speed over a journey is the total distance divided by the total time, not the average of the speeds. If a journey is covered at one speed going and another speed returning over the same distance, the average speed is twice the product of the two speeds divided by their sum. A candidate who averages the speeds directly will choose a wrong option that the examiner has deliberately placed in the list.
The relation between distance, speed and time also gives a useful proportion. For a fixed distance, the speed is inversely proportional to the time, so if the speed is doubled the time is halved. For a fixed time, the distance is proportional to the speed. Recognising which quantity is fixed lets a candidate solve many questions by proportion instead of by formula, which is often faster.
Trains passing each other, a man walking along a moving train, a boat going upstream and returning, and two runners on a circular track are all variations of the same ideas. The runner on a circular track meets the other runner after a time equal to the circumference divided by the relative speed, and the boat that goes downstream and returns covers the same distance twice at two different speeds. Recognising the underlying pattern turns a wordy question into a short calculation.
Relative speed also answers the classic question of two people starting from the same point at different times. If one starts later and travels faster, the time taken to catch up is the head start distance divided by the difference of the speeds, where the head start distance is the speed of the slower traveller multiplied by the time by which he started earlier. The same idea, with the sum of the speeds, answers the question of two people approaching each other from opposite ends.
The most common mistakes in this chapter are worth naming. Candidates mix up kilometres per hour and metres per second, they forget to add the length of the train when it crosses a platform, they average speeds instead of dividing total distance by total time, and they add the speeds when the two trains move in the same direction. Each of these slips is avoided by writing the units and the relative speed clearly before doing any arithmetic.
Time, speed and distance is a chapter of patterns rather than of formulas, and the patterns repeat in the paper. A candidate who can convert units without hesitation, distinguish crossing a pole from crossing a platform, and take a relative speed in the right direction will find the chapter reliable. The arithmetic is light and the reasoning is short, so with a week of practice the chapter becomes one of the quickest places to earn marks in the paper.
The problems on time, speed and distance are based on the relation that the distance travelled is the speed multiplied by the time. The three quantities are related, and if two are known the third can be found. The candidate should remember that the speed and the time are inversely proportional for a fixed distance, and that the unit of the speed must match the unit of the time. The common conversions are that a speed of one kilometre per hour is five by eighteen metres per second, and a speed of one metre per second is eighteen by five kilometres per hour.
The first type of question asks for the average speed, which is the total distance divided by the total time and not the average of the speeds. If a person travels the same distance at two different speeds, the average speed is the harmonic mean of the two speeds, which is two x y by x plus y. The candidate should always find the total distance and the total time separately, because this avoids the common mistake.
The second type is the problem of the train. A train that crosses a pole or a man travels a distance equal to its own length, a train that crosses a platform or a bridge travels a distance equal to its length plus the length of the platform, and two trains moving in the same direction cross each other with a relative speed equal to the difference of their speeds. Two trains moving in opposite directions cross each other with a relative speed equal to the sum of their speeds.
The third type is the problem of the boats and the streams. The speed of a boat in still water is u, the speed of the stream is v, and the speed downstream is u plus v and the speed upstream is u minus v. The speed of the boat in still water is the average of the downstream and the upstream speeds, and the speed of the stream is half the difference of the two. These two formulas answer all the questions on the topic.
The fourth type is the problem of the two persons starting from two places. If two persons start at the same time from two places and move towards each other, they meet after a time equal to the distance divided by the sum of their speeds. If they move in the same direction, the faster catches the slower after a time equal to the distance divided by the difference of their speeds. The candidate should draw a small diagram to avoid the confusion of the directions.
The fifth type is the problem of the relative speed and the late arrival. If a person travels at a slower speed and reaches late, and at a faster speed and reaches early, the distance can be found by equating the two times. The candidate should remember that the time is the distance divided by the speed, and that the difference of the two times is the difference of the arrival times. A table of the distance, the speed and the time for each case makes the solution clear.
The candidate should also know the questions on the two trains that cross each other. If two trains of lengths l1 and l2 move in the same direction with speeds s1 and s2, the faster train crosses the slower in a time equal to the sum of the lengths divided by the difference of the speeds. If they move in the opposite directions, the time is the sum of the lengths divided by the sum of the speeds.
The candidate should be able to find the speed of a train from the time it takes to cross a pole and a platform. The time to cross a pole gives the speed as the length of the train divided by the time, and the time to cross a platform gives the speed as the sum of the length of the train and the platform divided by the time. The candidate should form two equations and solve them.
The candidate should also know the questions on the circular track, in which two runners start from the same point. If they run in the same direction, they meet when the faster has gained one full round on the slower, so the time is the circumference divided by the difference of the speeds. If they run in the opposite directions, the time is the circumference divided by the sum of the speeds.
The candidate should be careful with the units. If the speed is given in kilometres per hour and the distance in metres, the candidate should convert the speed into metres per second by multiplying by five by eighteen, or convert the distance into kilometres. The candidate should keep the units consistent throughout the calculation, because a unit error is a common mistake.
The candidate should also know the questions on the average speed of a journey with three parts. The average speed is the total distance divided by the total time, and the candidate should find the time for each part separately. The candidate should not take the average of the speeds, because the average speed is the harmonic mean and not the arithmetic mean when the distances are equal.
The candidate should practise the questions on the boats and the streams with the time-speed-distance questions, because they are closely related. The candidate should also be able to find the distance when the speed and the time are given, the speed when the distance and the time are given, and the time when the distance and the speed are given, because these three types are the base of the topic.
- Distance equals speed times time; speed is distance over time.
- One metre per second equals three point six kilometres per hour.
- A train crossing a pole covers only its own length.
- A train crossing a platform covers its own length plus the platform's length.
- Two trains in opposite directions use the sum of speeds; in the same direction, the difference.
- Downstream speed is boat speed plus stream speed, upstream speed is the difference.
- Average speed is total distance divided by total time.
- Distance = speed × time.
- 1 km/h = 5/18 m/s; 1 m/s = 18/5 km/h.
- Average speed = total distance / total time; for equal distances, 2xy/(x+y).
- Boat: downstream = u+v, upstream = u-v.
- Two trains same direction: relative speed = difference; opposite: sum.
- Two trains same direction: time = (l1+l2)/(s1-s2); opposite: (l1+l2)/(s1+s2).
- Time to cross a pole uses the train's own length; a platform uses length + platform.
- Circular track, same direction: time = circumference/(difference of speeds).
- Keep the units consistent; convert km/h to m/s by ×5/18.
Frequently Asked Questions
Why is the average speed not the average of the speeds?
Because average speed is total distance divided by total time, and the faster part of the journey takes less time, so it gets less weight.
What distance does a train cover while crossing a platform?
Its own length plus the length of the platform, because the whole train must clear the platform.
How do I find the speed of a boat in still water?
It is half the sum of the downstream and upstream speeds; the speed of the stream is half their difference.
What is the relation between distance, speed and time?
Distance is the speed multiplied by the time.
What are the downstream and upstream speeds of a boat?
The downstream speed is u+v and the upstream speed is u-v, where u is the speed in still water and v is the speed of the stream.
How is the time found for two trains crossing in opposite directions?
The time is the sum of the lengths of the two trains divided by the sum of their speeds.
What distance does a train cover in crossing a platform?
The train covers a distance equal to its own length plus the length of the platform.