Simplification and Fractions
Simplification is the arithmetic of order. When a question strings several operations together, the answer depends entirely on which operation is done first, and the Grade III paper uses this fact to test whether a candidate has memorised the rule of precedence. The rule is remembered by the word BODMAS: brackets first, then orders or powers, then division and multiplication from left to right, and finally addition and subtraction from left to right. A candidate who follows BODMAS mechanically never loses a mark to a question that looks complicated but is really only a chain of easy steps.
Brackets come in three shapes and are cleared from the inside out. The innermost bracket, usually written with round brackets, is solved first, then the curly bracket, and then the square bracket. Whenever a fraction bar is present, the entire numerator and the entire denominator are treated as if they were inside brackets, so the top and the bottom must each be simplified completely before the division is carried out. A common mistake is to divide before finishing the numerator, which changes the answer.
Fractions are the second half of this chapter, and they appear in almost every other topic. A proper fraction has a numerator smaller than its denominator, an improper fraction has a numerator larger than or equal to its denominator, and a mixed fraction combines a whole number with a proper fraction. An improper fraction is turned into a mixed fraction by dividing the numerator by the denominator; the quotient becomes the whole number and the remainder becomes the new numerator over the same denominator.
Addition and subtraction of fractions require a common denominator, which is found most quickly as the lowest common multiple of the denominators. Once the denominators are the same, the numerators are added or subtracted and the result is reduced to its lowest terms by dividing the numerator and the denominator by their highest common factor. Multiplication is easier: multiply the numerators together and the denominators together, then reduce. To divide by a fraction, multiply by its reciprocal, that is, by the fraction turned upside down.
A fraction is in its lowest terms when the highest common factor of the numerator and the denominator is one. Reducing an answer is not optional, because the options are usually given in the reduced form and an unreduced answer will not match any of them. Candidates should get into the habit of reducing at the end of every calculation and of checking whether the numerator and the denominator share a small common factor such as two, three or five.
Decimals are fractions written in another notation, and questions often mix the two. To multiply decimals, ignore the decimal points, multiply the numbers as whole numbers, and then place the decimal point so that the number of decimal places in the answer equals the sum of the decimal places in the two factors. To divide decimals, shift the decimal point of both numbers to the right until the divisor becomes a whole number, then divide as usual. A decimal is converted to a fraction by writing it over a power of ten and reducing, so 0.625 becomes 625 over 1000, which reduces to five eighths.
Comparison of fractions is a frequent question type. Two fractions with the same denominator are compared by their numerators, and two fractions with the same numerator are compared by their denominators in reverse, because a larger denominator means smaller parts. When neither is equal, the fractions are cross-multiplied: the fraction whose numerator times the other denominator is larger is the larger fraction. Converting every fraction to a decimal is a safe fallback when the numbers are awkward.
The square root of a perfect square and the values of small powers are worth memorising. The squares of the numbers up to thirty and the cubes up to fifteen appear often, and recognising them instantly saves time. A question that asks for the value of the square root of a decimal is solved by pairing the digits from the decimal point outwards, and a question that asks for the value of a fraction raised to a power is solved by raising both the numerator and the denominator to that power.
Approximation and cancellation are the two time-savers that separate a fast candidate from a slow one. Cancellation removes a common factor from the numerator of one fraction and the denominator of another before multiplying, which keeps the numbers small. Approximation rounds each awkward number to a convenient one so that the size of the answer can be judged against the options, and a wrong option that is out by a factor of ten is rejected at once.
Finally, the chapter rewards neatness. Writing every step on paper, keeping the fractions aligned and reducing as you go prevents the small slips that cost marks. A candidate who practises twenty mixed questions a day for a week will find that the order of operations has become automatic and that the chapter, which looks the most mechanical of all, becomes the most reliable place to earn marks quickly.
From the point of view of the examination, simplification questions are a source of quick marks because they need no long reasoning and no formula to remember, only a fixed order and a clean hand. A candidate should read the whole question first and mark the brackets and fraction bars, then move one step at a time according to BODMAS. Trying to do several steps in the head is the cause of most errors, while writing each step on paper cuts the chance of a mistake in half.
Form the habit of a small check at the end of every answer: is the answer within the range of the question, and has it been reduced to its lowest terms? Some questions ask for the answer as a mixed fraction and some as an improper fraction, so notice the form in which the answer is wanted. This small care saves the one or two marks that most candidates lose and makes this chapter the most dependable source of marks in the paper.
Word problems that hide inside simplification are another favourite of the paper. A question may ask for the value of a fraction of a quantity, or for the result of adding and subtracting mixed fractions that describe parts of a whole, or for the difference between two decimal lengths. The method never changes: translate the sentence into a single expression, respect the order of operations, and reduce the answer. Candidates who panic at the words lose marks that the arithmetic would have given them freely.
The simplification of fractions tests the candidate's ability to apply the order of operations and the rules of the fractions correctly. The order of operations is the brackets first, then the powers, then the division and the multiplication, and finally the addition and the subtraction. The candidate should remember the word BODMAS, which stands for the brackets, the of, the division, the multiplication, the addition and the subtraction.
The fractions are added or subtracted after making the denominators equal, and they are multiplied by multiplying the numerators and the denominators. A fraction is divided by another by multiplying the first by the reciprocal of the second. The candidate should always reduce the final answer to its lowest terms, and should convert a mixed fraction into an improper fraction before the operations.
The simplification of the surds and the roots is a related topic. A surd can be simplified by taking out the largest perfect square factor, and two surds with the same order can be added or subtracted by adding or subtracting their coefficients. The product and the quotient of two surds are found by multiplying or dividing the numbers under the root. The candidate should know the squares up to thirty and the cubes up to fifteen, because these are used constantly.
The decimal fractions are also included. A decimal is multiplied by a power of ten by moving the decimal point to the right, and divided by a power of ten by moving it to the left. The candidate should be able to convert a decimal into a fraction and a fraction into a decimal, and should know the common conversions such as one-half, one-fourth, one-fifth and one-eighth. The recurring decimals have a special method, but the questions on them are usually simple.
The questions on the simplification often use the algebraic identities, such as the difference of two squares and the square of a sum. The expression a squared minus b squared can be written as a plus b into a minus b, and this factorisation simplifies many fractions. The candidate should look for the identities before starting the long multiplication, because recognising an identity turns a long problem into a short one.
The final type is the question on the approximation and the comparison of fractions. Two fractions can be compared by cross multiplication, or by converting them into decimals. The candidate should also be able to arrange a set of fractions in the ascending or the descending order, and to find the largest or the smallest fraction. These questions are common in the reasoning and the quantitative sections of the examination.
- BODMAS gives the order of operations: brackets, orders, division and multiplication, then addition and subtraction.
- Brackets are cleared from the innermost outwards.
- A fraction is reduced by dividing the numerator and the denominator by their highest common factor.
- To divide by a fraction, multiply by its reciprocal.
- Fractions are added by first making the denominators equal with their LCM.
- In the product of two decimals the number of decimal places equals the sum of the places in the factors.
- Cross-multiplication compares two fractions that have different numerators and denominators.
- Order of operations: BODMAS.
- Divide a fraction by another: multiply by the reciprocal.
- Compare fractions by cross multiplication.
- Use identities like a²-b² = (a+b)(a-b) to simplify.
Frequently Asked Questions
Why must the numerator be simplified before a fraction bar is divided?
A fraction bar acts as a bracket, so the whole numerator and the whole denominator must each be complete before the division is done; dividing early changes the answer.
How is a mixed fraction multiplied quickly?
Change every mixed fraction to an improper fraction first, then multiply numerators together and denominators together, and reduce the result.
What is the fastest way to compare two fractions?
Cross-multiply: multiply the first numerator by the second denominator and compare it with the first denominator times the second numerator.
What is the order of operations in simplification?
The order is brackets, of, division, multiplication, addition and subtraction, remembered as BODMAS.
How is one fraction divided by another?
A fraction is divided by another by multiplying the first by the reciprocal of the second.