Ratio and Proportion
Ratio and proportion form the bridge between arithmetic and algebra, and the ADRE Grade III paper tests them through short problems about sharing, mixing and scaling. A ratio compares two quantities of the same kind by division; the ratio of a to b is written a to b and read as a is to b. The two quantities must be in the same unit before the ratio is formed, so a ratio of two hours to thirty minutes must first be written as one hundred and twenty minutes to thirty minutes, which is four to one.
A ratio is a pure number and has no unit. Its two terms can both be multiplied or divided by the same non-zero number without changing the ratio, which is why a ratio is usually written in its lowest terms. A ratio of six to eight is the same as three to four. A ratio may be a part-to-part comparison, as in the ratio of boys to girls in a class, or a part-to-whole comparison, which is really a fraction of the whole.
A proportion is an equality of two ratios. When four quantities are in proportion, written a to b equals c to d, the product of the extremes equals the product of the means, so a times d equals b times c. This cross-multiplication is the single tool that solves most proportion questions. If any three of the four quantities are known, the fourth follows immediately.
The mean proportional between two numbers is the square root of their product, so the mean proportional between four and twenty-five is the square root of one hundred, which is ten. The third proportional to two numbers is found by setting the second as the mean proportional between the first and the third, and the fourth proportional is the fourth term of a proportion in which the first three are given. These three named quantities appear in the paper and are worth learning as formulas.
Division of a quantity in a given ratio is a very common question. To divide a sum in the ratio a to b, first find the total number of parts as a plus b, then the value of one part is the sum divided by the total number of parts, and each share is the value of one part multiplied by the corresponding term of the ratio. For a ratio of three or more terms the same method applies with the sum of all the terms as the total number of parts.
Continued proportion and the compounding of ratios extend the same idea. Three quantities are in continued proportion when the first is to the second as the second is to the third, in which case the middle term is the mean proportional of the other two. The compound ratio of two ratios is the ratio of the products of their corresponding terms, so the compound ratio of three to four and five to six is fifteen to twenty-four, which reduces to five to eight.
Some special ratios have their own names. The duplicate ratio of a to b is a squared to b squared, the sub-duplicate ratio is the square root of a to the square root of b, the triplicate ratio is a cubed to b cubed, and the sub-triplicate ratio is the cube root of a to the cube root of b. The inverse ratio of a to b is b to a. These names appear in the paper and are easy marks for a candidate who has learnt them.
Proportion is used in many practical settings. If the cost of a number of articles is given, the cost of another number is found by proportion, because cost varies directly with quantity. If a number of workers finish a job in a certain time, the time needed by another number of workers varies inversely with the number of workers, and the proportion must be written with the second ratio inverted. Recognising whether the variation is direct or inverse is the key step in every such question.
Mixtures and alligation bring ratio and proportion into the world of prices and strengths. The rule of alligation gives the ratio in which two ingredients of different prices or strengths must be mixed to produce a mixture of a given price or strength. If the mean price lies between the two given prices, the quantities are in the inverse ratio of the differences between each price and the mean. The rule is a shortcut that saves a candidate from setting up equations.
Partnership problems divide profit in the ratio of the capital invested multiplied by the time for which it was invested. If two partners invest in the ratio of their capitals and for the same time, the profit is divided in the ratio of the capitals. If the times are different, the profit is divided in the ratio of the products of capital and time. This single rule answers every partnership question in the paper.
The most common mistakes in this chapter are worth naming. Candidates form a ratio without converting both quantities to the same unit, they divide a sum in a given ratio without finding the value of one part, they forget to invert the second ratio in an inverse proportion, and they confuse the duplicate ratio with the compound ratio. Each of these slips is small but each costs a mark, and each is avoided by writing the proportion carefully before calculating.
Speed in this chapter comes from two habits: reducing every ratio to its lowest terms before using it, and writing the proportion as an equation of two fractions before cross-multiplying. A candidate who follows these habits will find that ratio and proportion, which look abstract at first, become a reliable source of quick marks, because the arithmetic is light and the reasoning is short. Practice with a set of twenty mixed questions a day for a week is enough to make the chapter automatic.
A ratio is a comparison of two quantities of the same kind by division, and a proportion is an equality of two ratios. The ratio of a to b is written as a is to b, and it has no unit because the quantities are of the same kind. The questions test the division of a quantity in a given ratio, the finding of the missing term in a proportion, and the problems on the mixture, the partnership and the ages that are solved by the ratio method.
The first idea to remember is that a ratio can be multiplied or divided by the same number without changing its value, and that a ratio should always be reduced to its lowest terms. The quantities being compared must be in the same unit; if one is in metres and the other in centimetres, the units must be converted first. A ratio of a to b can be written as a fraction a by b, and this helps in the comparison of two ratios.
A proportion has four terms, and the product of the extremes equals the product of the means. If a is to b equals c is to d, then a into d equals b into c, and any one of the four terms can be found if the other three are known. The continued proportion is a proportion in which the second term equals the third, and the mean proportional between a and c is the square root of a into c. The candidate should also know how to find the fourth proportional and the third proportional.
The division of a quantity in a given ratio is a common question. If a sum of money is to be divided between two persons in the ratio a is to b, the first share is the sum into a by a plus b, and the second share is the sum into b by a plus b. If the ratio has three terms, the same method is extended. This idea is used in the partnership problems, where the profit is divided in the ratio of the capital and the time.
The comparison of two ratios is asked in the form of which ratio is greater. Two ratios a by b and c by d can be compared by cross multiplication, because a by b is greater than c by d if a into d is greater than b into c. When the terms of a ratio are increased or decreased, the change in the ratio is asked; for example, if the numerator is increased by a certain amount and the denominator by another, the new ratio must be calculated carefully.
The problems on the ages, the coins and the mixtures are solved by the ratio method. If the present ages of two persons are in a given ratio and the ratio after some years is given, the present ages can be found by forming an equation. If a bag contains coins of different denominations in a given ratio and the total value is given, the number of each type of coin can be found. A candidate who can form the ratio equation from the statement solves these questions easily.
The candidate should also know the problems on the mixture, in which two or more ingredients are mixed in a given ratio. If two types of a commodity are mixed in the ratio a is to b and their prices are given, the average price of the mixture is the sum of the products of the price and the quantity, divided by the sum of the quantities. This is the same as the weighted average, and the candidate should be comfortable with both the methods.
The candidate should be able to find the ratio of two quantities when their sum and their difference are given. If the sum is S and the difference is D, the two quantities are S plus D by two and S minus D by two. The candidate should also be able to divide a quantity into three parts in a given ratio, which is an extension of the method for two parts.
The candidate should be careful with the questions in which a ratio is changed by adding or subtracting the same quantity from both the terms. If the ratio of two numbers is a is to b and the same number x is added to both, the new ratio is given, and the candidate should form an equation and solve for x. This type of question is common in the papers on the ratio.
The candidate should also know the problems on the income and the expenditure, which are solved by the ratio method. If the incomes of two persons are in a given ratio and their expenditures are in another ratio, and their savings are given, the incomes and the expenditures can be found by forming equations. The candidate should take the incomes as a x and b x and the expenditures as c y and d y.
The candidate should note that the ratio is a pure number and has no unit. The candidate should also note that the order of the terms is important, because the ratio a is to b is not the same as the ratio b is to a. The candidate should be able to find the inverse ratio, the duplicate ratio, the sub-duplicate ratio, the triplicate ratio and the sub-triplicate ratio, because these are occasionally asked.
The candidate should practise the questions on the proportion with the fractions and the decimals, because the paper often uses them. The candidate should also be able to find the fourth proportional, the third proportional and the mean proportional, and should remember that the mean proportional between two numbers is the square root of their product.
- A ratio compares two quantities of the same kind and has no unit.
- A ratio is reduced by dividing both terms by their HCF.
- In a proportion a to b equals c to d, a times d equals b times c.
- The mean proportional between two numbers is the square root of their product.
- To divide a sum in a given ratio, first find the value of one part.
- In inverse proportion the second ratio is inverted before the equation is written.
- Profit in a partnership is divided in the ratio of capital multiplied by time.
- Ratio a : b = a/b; a ratio has no unit.
- Proportion a : b = c : d means ad = bc.
- Mean proportional between a and c = √(ac).
- Divide a sum in ratio a : b: shares are Sa/(a+b) and Sb/(a+b).
- Compare ratios a/b and c/d by cross multiplication.
- Sum S and difference D of two quantities: (S+D)/2 and (S-D)/2.
- If the same number is added to both terms, form an equation and solve for it.
- Income and expenditure problems: take the incomes and the expenditures as multiples.
- Mean proportional between a and c = √(ac).
Frequently Asked Questions
What is the difference between a ratio and a proportion?
A ratio compares two quantities by division, while a proportion states that two ratios are equal.
How do I decide whether a variation is direct or inverse?
If one quantity rises as the other rises, the variation is direct; if one rises as the other falls, it is inverse and the second ratio is inverted.
How is the mean proportional used?
It is the square root of the product of the two numbers and also serves as the middle term of a continued proportion.
What does the proportion a : b = c : d mean?
It means that the product of the extremes equals the product of the means, that is ad = bc.
How is a sum divided in the ratio a : b?
The shares are Sa/(a+b) and Sb/(a+b), where S is the sum.
How are two quantities found from their sum and difference?
The quantities are (S+D)/2 and (S-D)/2, where S is the sum and D is the difference.
What is the mean proportional between a and c?
The mean proportional between a and c is the square root of ac.