এটা প্ৰশ্নই চিত্ৰৰ এটা সমষ্টি দেখুৱাই কোন দুটা একে, বা কোন তিনিটাই এটা দল বনায় সোধে। পদ্ধতি একেই, আৰু প্ৰাৰ্থীয়ে গোটটোৱে ভাগ কৰা ধৰ্মটো বিচাৰি চিত্ৰবোৰত প্ৰয়োগ কৰা উচিত। ধৰ্মটোৱে চিত্ৰবোৰৰ সৈতে মিলিব লাগে বাবে প্ৰাৰ্থীয়ে দিয়া প্ৰতিটো চিত্ৰ ব্যৱহাৰ কৰা উচিত।
এটা প্ৰশ্নই চিত্ৰৰ এটা সমষ্টি দেখুৱাই কোন দুটা একে, বা কোন তিনিটাই এটা দল বনায় সোধে। পদ্ধতি একেই, আৰু প্ৰাৰ্থীয়ে গোটটোৱে ভাগ কৰা ধৰ্মটো বিচাৰি চিত্ৰবোৰত প্ৰয়োগ কৰা উচিত। ধৰ্মটোৱে চিত্ৰবোৰৰ সৈতে মিলিব লাগে বাবে প্ৰাৰ্থীয়ে দিয়া প্ৰতিটো চিত্ৰ ব্যৱহাৰ কৰা উচিত।
আকৃতি গঠন আৰু গোট কৰাৰ প্ৰশ্নত কিছুমান সৰু আকৃতি দিয়া থাকে আৰু সেইবোৰৰ পৰা এটা ডাঙৰ আকৃতি গঠন কৰিব লাগে, বা সমান ধৰ্মৰ আকৃতি গোট কৰিব লাগে। আকৃতিৰ সংযোগস্থলত ৰেখাবোৰ কিদৰে মিলে সেয়া মন কৰাটো গুৰুত্বপূৰ্ণ। সৰু আকৃতিবোৰৰ প্ৰান্তবোৰ মিলাই চাব লাগে।
এটা ডাঙৰ আকৃতি গঠন কৰিবলৈ সৰু আকৃতিবোৰৰ সঠিক সংযোগ বিচাৰিব লাগে। কেতিয়াবা দুটা ত্ৰিভুজ মিলি এটা বৰ্গ বা আয়ত হয়, আৰু কেতিয়াবা দুটা অৰ্ধবৃত্ত মিলি এটা বৃত্ত হয়। এই মিলনৰ ধাৰণাটোৱেই এই প্ৰশ্নৰ ভেটি।
গোট কৰাৰ প্ৰশ্নত আকৃতিৰ ৰেখাৰ সংখ্যা, বাহুৰ দৈৰ্ঘ্য, বা কোণৰ ওপৰত ভিত্তি কৰি গোট কৰিব লাগে। প্ৰতিটো আকৃতিৰ সাধাৰণ বৈশিষ্ট্য তালিকাভুক্ত কৰি সেই বৈশিষ্ট্য অনুসৰি গোট কৰিলে সঠিক উত্তৰ পোৱা যায়।
হয়, যেনে সকলো ৰেখা পোন বা সকলো বক্ৰ; বাহু আৰু অঞ্চলৰ লগতে ৰেখাবোৰো পৰীক্ষা কৰক।
Shape Construction & Grouping
A shape construction question asks which figure can be made by joining the pieces given, or which set of pieces makes a stated figure. The pieces may be turned but are not stretched, and every piece must be used exactly once. The chapter depends on picturing the join and on checking the pieces one by one, and a candidate who works on paper will answer reliably.
The candidate should count the pieces and should note their shapes before looking at the options. A set of four pieces makes a figure that uses all four, and the candidate should look for a figure that has exactly the four pieces. A figure that needs five pieces, or that uses a piece twice, is wrong.
The candidate should look for the distinctive piece, such as a long piece or an oddly shaped piece, and should find where it can fit. The distinctive piece narrows the search, because it can fit in only a few places. The candidate should place the distinctive piece first and should then fit the others around it.
A useful method is to trace the pieces on paper and to join them by moving the tracing. The candidate should trace each piece and should try to join the traces to form the option. Tracing is slower than working in the head, but it is reliable, and the candidate should use it for the harder questions.
The candidate should be careful with a piece that can be turned but not flipped, because a turned piece is allowed and a flipped piece is not. A piece that fits only when it is flipped is not a fit, and the candidate should reject it. The candidate should keep the orientation of the pieces in mind.
A grouping question asks which of the given figures are alike in some respect, or which figure does not belong to the group. The likeness may be in the number of sides, the number of enclosed regions, the symmetry or the shading. The candidate should name the property and should test each figure against it.
A useful question for grouping is which property all the figures share. The candidate should test the number of sides, the number of regions, the symmetry and the shading, one at a time, and should find the property that fits all but one. The candidate should not stop at the first property that fits some of the figures.
A question may show a set of figures and ask which two are alike, or which three form a group. The method is the same, and the candidate should find the property that the group shares and should apply it to the figures. The candidate should use all the figures that are given, because the property must fit them.
A useful check is to test the chosen figure or group against the property once more and to make sure that no figure breaks it. The check takes a few seconds and catches the slip of missing a figure that breaks the property. The candidate should form the habit of checking the choice against the whole property.
Finally, practise the chapter with a set of construction and grouping questions, and work each one on paper. Ten minutes of this practice makes the shapes familiar, so that in the examination hall the answer is found in a minute. The chapter rewards a candidate who works on paper, and the marks come reliably once the shapes are at hand.
It helps to count the pieces and to note their shapes before looking at the options, because the number and the shape of the pieces settle the question. A set of four pieces makes a figure that uses all four, and the candidate should look for a figure that has exactly the four pieces. A figure that needs five pieces, or that uses a piece twice, is wrong.
A useful question is which piece is the distinctive one, such as a long piece or an oddly shaped piece. The distinctive piece narrows the search, because it can fit in only a few places. The candidate should place the distinctive piece first and should then fit the others around it.
The candidate should be careful with a piece that can be turned but not flipped, because a turned piece is allowed and a flipped piece is not. A piece that fits only when it is flipped is not a fit, and the candidate should reject it. The candidate should keep the orientation of the pieces in mind.
A useful method is to trace the pieces on paper and to join them by moving the tracing. The candidate should trace each piece and should try to join the traces to form the option. Tracing is slower than working in the head, but it is reliable, and the candidate should use it for the harder questions.
For a grouping question, the candidate should name the property that the figures share, such as the number of sides, the number of enclosed regions, the symmetry or the shading. The candidate should test each property in turn and should find the one that fits all the figures but one. The candidate should not stop at the first property that fits some of the figures.
A question may show a set of figures and ask which two are alike, or which three form a group. The method is the same, and the candidate should find the property that the group shares and should apply it to the figures. The candidate should use all the figures that are given, because the property must fit them.
A useful check is to test the chosen figure or group against the property once more and to make sure that no figure breaks it. The check takes a few seconds and catches the slip of missing a figure that breaks the property. The candidate should form the habit of checking the choice against the whole property.
The candidate should also handle a construction question that gives a figure and asks which set of pieces makes it. The candidate should count the pieces in the figure and should look for the set that has the same pieces. The candidate should check the number of pieces first, because a set with the wrong number is out at once.
The candidate should be careful with a figure that is made of pieces of more than one shape, because the candidate should count each shape separately. A figure made of two triangles and one square needs a set with two triangles and one square, and the candidate should look for that set. Counting each shape separately is the whole method for such a question.
Finally, practise the chapter with a set of construction and grouping questions, and work each one on paper. Ten minutes of this practice makes the shapes familiar, so that in the examination hall the answer is found in a minute. The chapter rewards a candidate who works on paper, and the marks come reliably once the shapes are at hand.
A last point is about the kind of grouping that turns on the number of enclosed regions rather than on the number of sides. A set of figures may all have two regions except one, and the candidate should count the regions and should find the one that differs. Counting the regions is the same skill as counting the sides, and the candidate should write the number beside each figure and compare.
The candidate should also remember that a figure may be grouped by a property of its lines, such as all the lines being straight or all being curved. A set of figures with straight lines and one with a curve makes the curved one the odd figure, and the candidate should test the lines. Testing the number of sides, the regions, the lines, the symmetry and the shading in turn is the safe habit.
Count the pieces and note their shapes before looking at the options.
Look for the distinctive piece and place it first.
Pieces may be turned but not flipped, stretched or overlapped.
For grouping, name the property that the figures share and test each figure.
Check the chosen figure or group against the whole property.
Count the pieces and note their shapes before looking at the options.
Place the distinctive piece first and fit the others around it.
Pieces may be turned but not flipped, stretched or overlapped.
For grouping, test the number of sides, regions, symmetry and shading in turn.
For a construction question, count the pieces of each shape in the figure.
A group may turn on the number of enclosed regions rather than the sides.
A figure may be grouped by a property of its lines, such as straight or curved.
Frequently Asked Questions
Can the pieces be flipped in a shape construction question?
No. The pieces may be turned but not flipped, stretched or overlapped, and each is used once.
How do I solve a grouping question?
Name the property that the figures share, such as the number of sides or the symmetry, and test each figure against it.
Why place the distinctive piece first?
Because it can fit in only a few places, so it narrows the search and the other pieces can then be fitted around it.
How do I solve a construction question that gives the figure?
Count the pieces of each shape in the figure and look for the set that has the same pieces; check the number first.
Can figures be grouped by their lines?
Yes, such as all the lines being straight or all being curved; test the lines as well as the sides and regions.
ADRE 3.0 গ্ৰেড III পৰীক্ষাৰ যুক্তি আৰু বৌদ্ধিক ক্ষমতা (Reasoning & Mental Ability)। প্ৰশ্ন আৰু ব্যাখ্যাবোৰ শেহতীয়া অসম নিয়োগ পত্ৰত ব্যৱহৃত আৰ্হি অনুসৰি প্ৰস্তুত, আৰু প্ৰতিটো অধ্যায় এনে ধৰণে লিখা হৈছে যাতে পৰীক্ষা কক্ষত পদ্ধতিটো পুনৰ উলিয়াব পাৰি।
Reasoning & Mental Ability for the ADRE 3.0 Grade III examination. The questions and explanations follow the patterns used in recent Assam recruitment papers, and each topic is written so that the method can be reproduced in the examination hall.