1. Newton's Laws of Motion in Daily Life
নিউটনৰ গতি সূত্ৰ দৈনন্দিন জীৱনত
Sir Isaac Newton gave three laws of motion, which form the foundation of physics. The first law, called the law of inertia, says an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless an external unbalanced force acts on it. This is why a moving bus that stops suddenly throws passengers forward, and why we feel a jerk when a car suddenly accelerates. The second law explains that force equals mass times acceleration, written as F = ma, where F is the force, m is the mass and a is the acceleration. This is why a light cricket ball is easier to push than a heavy stone, and why the same force produces more acceleration on a lighter object. The second law also gives the unit of force, the newton, which is defined as the force that gives an acceleration of one metre per second squared to a mass of one kilogram. The third law states that every action has an equal and opposite reaction, meaning if object A exerts a force on object B, then object B exerts an equal and opposite force on object A. This is how rockets lift off the ground by pushing exhaust gases downward, and how a swimmer pushes the water backward to move forward. Inertia is the natural tendency of an object to resist a change in its state of motion, and it depends on the mass of the object, so a heavier object has more inertia. Newton's laws are a very common topic in the physics section of ADRE, ADRE 2.0 and other competitive exams.
আইজাক নিউটনে গতি সম্পৰ্কীয় তিনিটা সূত্ৰ প্ৰদান কৰিছিল, যিবোৰ পদাৰ্থ বিজ্ঞানৰ ভেটি। প্ৰথম সূত্ৰ, যাক জড়তাৰ সূত্ৰ বোলা হয়, মতে বাহ্যিক অসমতুল বল নাখালে স্থিতিশীল বস্তু স্থিতিশীল আৰু গতিশীল বস্তু একে গতি আৰু একে দিশত গতিশীল থাকে। এই কাৰণেই গতিশীল বাছ হঠাৎ ৰৈ গ'লে যাত্ৰী আগফালে পৰি যায়, আৰু কাৰ এখন হঠাৎ ত্বৰিত হ'লে আমি টান অনুভৱ কৰো। দ্বিতীয় সূত্ৰ মতে, বল = ভৰ × ত্বৰণ, যিটো F = ma হিচাপে লিখা হয়, য'ত F হৈছে বল, m হৈছে ভৰ আৰু a হৈছে ত্বৰণ। এই কাৰণেই গধুৰ শিলতকৈ পাতল ক্ৰিকেট বল ঠেলা সহজ, আৰু একে বলত পাতল বস্তুৰ ত্বৰণ বেছি হয়। দ্বিতীয় সূত্ৰই বলৰ একক নিউটনো দিয়ে, যিটোক এক কিলোগ্ৰাম ভৰত এক মিটাৰ প্ৰতি ছেকেণ্ড বৰ্গ ত্বৰণ দিয়া বল হিচাপে সংজ্ঞাবদ্ধ কৰা হয়। তৃতীয় সূত্ৰ মতে, প্ৰতিটো কাৰ্য্যৰ সমান আৰু বিপৰীত প্ৰতিক্ৰিয়া আছে, অৰ্থাৎ বস্তু A য়ে বস্তু B ত বল প্ৰয়োগ কৰিলে, বস্তু B য়ে বস্তু A ত সমান আৰু বিপৰীত বল প্ৰয়োগ কৰে। ৰকেটে গেছ তললৈ ঠেলি দি এই নিয়মতে ওপৰলৈ উৰে, আৰু সাঁতোৰে পানী পিছফালে ঠেলি আগলৈ যায়। জড়তা হৈছে বস্তুৰ গতি অৱস্থাৰ পৰিৱৰ্তনক বিৰোধিতা কৰা স্বাভাৱিক প্ৰৱণতা, আৰু ই বস্তুৰ ভৰৰ ওপৰত নিৰ্ভৰ কৰে, সেয়ে গধুৰ বস্তুৰ জড়তা বেছি। নিউটনৰ সূত্ৰ ADRE, ADRE 2.0 আৰু অন্যান্য প্ৰতিযোগিতামূলক পৰীক্ষাত পদাৰ্থ বিজ্ঞান বিভাগৰ অতি সাধাৰণ বিষয়।
2. Work, Energy and Power
কাৰ্য্য, শক্তি আৰু ক্ষমতা
In physics, work is done when a force moves an object through a distance in the direction of the force. The formula is Work = Force × Displacement, and the unit of work is the joule. If a force is applied but the object does not move, no work is done in the scientific sense. For example, pushing a wall hard does no work because the wall does not move. Energy is the capacity to do work, and its unit is also the joule. Energy exists in many forms: kinetic energy, which is the energy of a moving object and is given by (1/2)mv²; potential energy, which is the energy stored in an object due to its position or height and is given by mgh; and other forms such as heat energy, light energy, sound energy, electrical energy and chemical energy. The law of conservation of energy states that energy can neither be created nor destroyed, but it can be converted from one form to another. For example, in a hydroelectric dam, the potential energy of water is converted into kinetic energy, then into electrical energy. Power is the rate of doing work, and it is given by Power = Work/Time, with the unit being the watt. One horsepower is equal to 746 watts. Commercial electricity is measured in kilowatt-hours, and one kilowatt-hour is the energy consumed by a one-kilowatt device in one hour, which is equal to 3.6 million joules. In exams, the units of work, energy and power, and the formulas for kinetic and potential energy, are the most commonly asked questions in ADRE and other competitive exams.
পদাৰ্থ বিজ্ঞানত, কাৰ্য্য তেতিয়াহে হয় যেতিয়া বল এটাই বস্তু এটাক বলৰ দিশত দূৰত্ব অতিক্ৰম কৰায়। সূত্ৰ: কাৰ্য্য = বল × সৰণ, আৰু কাৰ্য্যৰ একক হৈছে জুল। বল প্ৰয়োগ কৰিলেও বস্তুটো নিচলিলে বৈজ্ঞানিক অৰ্থত কোনো কাৰ্য্য নহয়। উদাহৰণস্বৰূপে, বেৰ এখন জোৰেৰে ঠেলিলেও কাৰ্য্য নহয়, কিয়নো বেৰখন নিচলে। শক্তি হৈছে কাৰ্য্য কৰাৰ ক্ষমতা, আৰু ইয়াৰ এককো জুল। শক্তি বহু ৰূপত থাকে: গতিশক্তি, যিটো গতিশীল বস্তুৰ শক্তি আৰু সূত্ৰ (১/২)mv²; স্থিতিশক্তি, যিটো বস্তুৰ অৱস্থান বা উচ্চতাৰ বাবে সংৰক্ষিত শক্তি আৰু সূত্ৰ mgh; আৰু তাপ শক্তি, পোহৰ শক্তি, শব্দ শক্তি, বৈদ্যুতিক শক্তি আৰু ৰাসায়নিক শক্তি আদি আন ৰূপ। শক্তি সংৰক্ষণ নিয়ম মতে, শক্তি সৃষ্টি বা ধ্বংস নকৰিব পাৰি, কিন্তু এক ৰূপৰ পৰা আন এটা ৰূপলৈ পৰিৱৰ্তন কৰিব পাৰি। উদাহৰণস্বৰূপে, জলবিদ্যুৎ বান্ধত, পানীৰ স্থিতিশক্তি গতিশক্তিলৈ, তাৰ পিছত বৈদ্যুতিক শক্তিলৈ পৰিৱৰ্তন হয়। ক্ষমতা হৈছে কাৰ্য্য কৰাৰ হাৰ, আৰু সূত্ৰ: ক্ষমতা = কাৰ্য্য/সময়, যাৰ একক হৈছে ৱাট। এটা হৰ্চপাৱাৰ সমান ৭৪৬ ৱাট। বাণিজ্যিক বিদ্যুৎ কিলোৱাট-ঘণ্টাত মাপা হয়, আৰু এটা কিলোৱাট-ঘণ্টা হৈছে এটা কিলোৱাট যন্ত্ৰই এটা ঘণ্টাত খৰচ কৰা শক্তি, যিটো ৩.৬ মিলিয়ন জুলৰ সমান। পৰীক্ষাত কাৰ্য্য, শক্তি আৰু ক্ষমতাৰ একক, আৰু গতি আৰু স্থিতিশক্তিৰ সূত্ৰ ADRE আৰু অন্যান্য প্ৰতিযোগিতামূলক পৰীক্ষাত আটাইতকৈ সাধাৰণ প্ৰশ্ন।
3. Light: Reflection, Refraction and Lenses
পোহৰ: প্ৰতিফলন, প্ৰতিসৰণ আৰু লেন্স
Light is a form of energy that travels in straight lines, and its speed in a vacuum is about 3 × 10⁸ metres per second, which is the fastest speed in the universe. The speed of light is slower in water and glass. Reflection is the bouncing back of light when it strikes a smooth surface, and the law of reflection states that the angle of incidence is equal to the angle of reflection. A plane mirror forms an image that is virtual, erect and of the same size as the object, and the image distance is equal to the object distance. A concave mirror converges light and is used in torches, headlights and shaving mirrors, while a convex mirror diverges light and is used in rear-view mirrors of vehicles because it gives a wider field of view. Refraction is the bending of light when it passes from one medium to another. When light travels from a rarer medium to a denser medium, it bends towards the normal, and when it travels from a denser to a rarer medium, it bends away from the normal. This is why a pencil appears bent when placed in a glass of water. A convex lens converges light and is used to correct long-sightedness, while a concave lens diverges light and is used to correct short-sightedness. The splitting of white light into seven colours is called dispersion, and the rainbow is formed by this phenomenon. In exams, the law of reflection, the image formed by plane and curved mirrors, and the use of convex and concave lenses are the most commonly asked topics.
পোহৰ হৈছে এবিধ শক্তি, যিটো সৰল ৰেখাত যাত্ৰা কৰে, আৰু ইয়াৰ গতি শূন্য স্থানত প্ৰায় ৩ × 10⁸ মিটাৰ প্ৰতি ছেকেণ্ড, যিটো বিশ্বব্ৰহ্মাণ্ডৰ আটাইতকৈ দ্ৰুত গতি। পানী আৰু কাঁচত পোহৰৰ গতি কম। প্ৰতিফলন হৈছে মসৃণ পৃষ্ঠত পৰি পোহৰ উভতি অহা, আৰু প্ৰতিফলন নিয়ম মতে, আপতন কোণ প্ৰতিফলন কোণৰ সমান। সমতল দাপোণে এনে প্ৰতিবিম্ব গঠন কৰে যিটো অৱাস্তৱ, সোজা আৰু বস্তুৰ সমান আকাৰৰ, আৰু প্ৰতিবিম্ব দূৰত্ব বস্তু দূৰত্বৰ সমান। অৱতল দাপোণে পোহৰ একত্ৰিত কৰে আৰু টৰ্চ, হেডলাইট আৰু চেভিং মিৰ'ৰত ব্যৱহৃত, আনহাতে উত্তল দাপোণে পোহৰ বিকিৰণ কৰে আৰু বাহনৰ ৰিয়াৰ-ভিউ মিৰ'ৰত ব্যৱহৃত কিয়নো ই অধিক দৃশ্যক্ষেত্ৰ দিয়ে। প্ৰতিসৰণ হৈছে এক মাধ্যমৰ পৰা আন মাধ্যমলৈ যাওঁতে পোহৰৰ বেঁকা হোৱা। পোহৰ লঘু মাধ্যমৰ পৰা ঘন মাধ্যমলৈ যাওঁতে অভিলম্বৰ ফালে বেঁকে, আৰু ঘনৰ পৰা লঘুলৈ যাওঁতে অভিলম্বৰ পৰা আঁতৰি বেঁকে। এই কাৰণেই কাঁচৰ গিলাচত ৰখা পেঞ্চিল এডাল বেঁকা দেখা যায়। উত্তল লেন্সে পোহৰ একত্ৰিত কৰে আৰু দূৰদৃষ্টি শুধৰাবলৈ, আনহাতে অৱতল লেন্সে পোহৰ বিকিৰণ কৰে আৰু নিকটদৃষ্টি শুধৰাবলৈ ব্যৱহৃত। বগা পোহৰক সাতটা ৰঙত ভাগ হোৱাটোক বিক্ষেপণ বোলা হয়, আৰু ৰংধনু এই পৰিঘটনাৰে গঠিত হয়। পৰীক্ষাত প্ৰতিফলন নিয়ম, সমতল আৰু বক্ৰ দাপোণে গঠন কৰা প্ৰতিবিম্ব, আৰু উত্তল-অৱতল লেন্সৰ ব্যৱহাৰ আটাইতকৈ সাধাৰণ বিষয়।
4. Sound and Its Properties
শব্দ আৰু ইয়াৰ ধৰ্ম
Sound is a form of energy that is produced by vibrations and travels in the form of longitudinal waves. Sound needs a medium to travel, so it cannot travel in a vacuum. This is why astronauts cannot hear each other directly in space. The speed of sound is about 343 metres per second in air at room temperature, but it is faster in liquids and fastest in solids, because the particles are closer. The speed of sound is much slower than the speed of light, which is why we see lightning before we hear the thunder. The loudness of sound depends on the amplitude of the wave, and it is measured in decibels. The pitch of a sound depends on its frequency, and the frequency is measured in hertz. A high-pitched sound has a high frequency, and a low-pitched sound has a low frequency. The human ear can hear sounds between about 20 hertz and 20,000 hertz, and sounds above 20,000 hertz are called ultrasonic sounds. Bats use ultrasonic sound for navigation, and sonar uses sound waves to detect objects under water. The reflection of sound is called an echo, and it is heard when the reflecting surface is at least about 17 metres away. The quality of sound that distinguishes one voice from another is called timber. In exams, the medium requirement of sound, the speed comparisons, and the terms amplitude, frequency and ultrasonic are the most commonly asked.
শব্দ হৈছে এবিধ শক্তি, যিটো কম্পনৰ দ্বাৰা উৎপন্ন হয় আৰু অনুদৈৰ্ঘ্য তৰংগৰ ৰূপত যাত্ৰা কৰে। শব্দ চলাচলৰ বাবে এটা মাধ্যম লাগে, সেয়ে শূন্য স্থানত শব্দ চলিব নোৱাৰে। এই কাৰণেই মহাকাশত মহাকাশচাৰীসকলে পোনপটীয়াকৈ শব্দ শুনিব নোৱাৰে। বায়ুত কোঠা উষ্ণতাত শব্দৰ গতি প্ৰায় ৩৪৩ মিটাৰ প্ৰতি ছেকেণ্ড, কিন্তু তৰলত ই বেছি আৰু কঠিনত আটাইতকৈ বেছি, কিয়নো কণাবোৰ ওচৰত থাকে। শব্দৰ গতি পোহৰৰ গতিতকৈ বহু কম, সেয়ে আমি বজ্রপাত শুনাৰ আগতে বিজুলী দেখা পাওঁ। শব্দৰ উচ্চতা তৰংগৰ বিস্তাৰৰ ওপৰত নিৰ্ভৰ, আৰু ই ডেচিবেলত মাপা হয়। শব্দৰ পিচ ইয়াৰ কম্পাঙ্কৰ ওপৰত নিৰ্ভৰ, আৰু কম্পাঙ্ক হাৰ্টজত মাপা হয়। উচ্চ-পিচ শব্দৰ কম্পাঙ্ক বেছি, আৰু নিম্ন-পিচ শব্দৰ কম্পাঙ্ক কম। মানুহৰ কাণে প্ৰায় ২০ হাৰ্টজৰ পৰা ২০,০০০ হাৰ্টজলৈ শব্দ শুনিব পাৰে, আৰু ২০,০০০ হাৰ্টজতকৈ বেছি শব্দক আল্ট্ৰাছনিক শব্দ বোলা হয়। বাদুলিয়ে আল্ট্ৰাছনিক শব্দেৰে চলাচলত সহায় লয়, আৰু ছনাৰে পানীৰ তলত বস্তু ধৰা পেলাবলৈ শব্দ তৰংগ ব্যৱহাৰ কৰে। শব্দৰ প্ৰতিফলনক প্ৰতিধ্বনি বোলা হয়, আৰু প্ৰতিফলক পৃষ্ঠখন প্ৰায় ১৭ মিটাৰ দূৰত্বত থাকিলে ই শুনা যায়। একে শব্দ আন শব্দৰ পৰা পৃথক কৰা গুণটোক কাঠিন্য (timbre) বোলা হয়। পৰীক্ষাত শব্দৰ মাধ্যমৰ প্ৰয়োজনীয়তা, গতি তুলনা, আৰু বিস্তাৰ, কম্পাঙ্ক আৰু আল্ট্ৰাছনিক শব্দ আটাইতকৈ সাধাৰণ প্ৰশ্ন।
5. Electricity and Magnetism Basics
বিদ্যুৎ আৰু চুম্বকত্বৰ মূল কথা
Electric current is the flow of electric charge, and it flows from the positive terminal to the negative terminal. The unit of current is the ampere, and it is measured with an ammeter. The electric potential difference between two points is measured in volts with a voltmeter. The resistance of a conductor is measured in ohms, and it depends on the material, length and thickness of the conductor. Ohm's law states that the current flowing through a conductor is directly proportional to the potential difference across it, written as V = IR, where V is voltage, I is current and R is resistance. A good conductor like copper has low resistance, while insulators like rubber and plastic have very high resistance. The heating effect of current is used in electric heaters, kettles and bulbs, and the magnetic effect of electric current is used in electric bells and motors. A magnet has two poles, the north pole and the south pole, and unlike poles attract while like poles repel. The earth itself behaves like a huge magnet, and a freely suspended magnet always points in the north-south direction, which is the principle of the compass. The unit of electric power is the watt, and electric energy is measured in kilowatt-hours. In a series circuit, the same current flows through all components, while in a parallel circuit, the voltage is the same across all branches and the current divides. Household wiring is done in parallel so that each appliance gets the full voltage. In exams, Ohm's law, the units of current, voltage and resistance, and series-parallel circuits are the most commonly asked topics.
বৈদ্যুতিক প্ৰবাহ হৈছে বৈদ্যুতিক আধানৰ প্ৰবাহ, আৰু ই ধনাত্মক টাৰ্মিনেলৰ পৰা ঋণাত্মক টাৰ্মিনেললৈ বৈ যায়। প্ৰবাহৰ একক হৈছে এম্পিয়াৰ, আৰু ই এমিটাৰেৰে মাপা হয়। দুই বিন্দুৰ মাজৰ বৈদ্যুতিক বিভৱ পাৰ্থক্য ভল্টত ভল্টমিটাৰেৰে মাপা হয়। পৰিবাহীৰ ৰোধ ওহমত মাপা হয়, আৰু ই পৰিবাহীৰ উপাদান, দৈৰ্ঘ্য আৰু ডাঠতাৰ ওপৰত নিৰ্ভৰ। ওহমৰ সূত্ৰ মতে, পৰিবাহীৰ মাজেৰে যোৱা প্ৰবাহ ইয়াৰ আৰপাৰ বিভৱ পাৰ্থক্যৰ সমানুপাতিক, যিটো V = IR হিচাপে লিখা হয়, য'ত V হৈছে ভল্টেজ, I হৈছে প্ৰবাহ আৰু R হৈছে ৰোধ। তামৰ দৰে ভাল পৰিবাহীৰ ৰোধ কম, আনহাতে ৰবৰ আৰু প্লাষ্টিকৰ দৰে অন্তৰকৰ ৰোধ বহুত বেছি। প্ৰবাহৰ তাপীয় প্ৰভাৱ বৈদ্যুতিক হিটাৰ, কেটলি আৰু বাল্বত ব্যৱহৃত, আৰু বৈদ্যুতিক প্ৰবাহৰ চুম্বকীয় প্ৰভাৱ বৈদ্যুতিক ঘণ্টা আৰু মটৰত ব্যৱহৃত। চুম্বকৰ দুটা মেৰু আছে, উত্তৰ মেৰু আৰু দক্ষিণ মেৰু, আৰু বিপৰীত মেৰুই আকৰ্ষণ আৰু একে মেৰুই বিকৰ্ষণ কৰে। পৃথিৱীয়ে নিজেই এটা বিশাল চুম্বকৰ দৰে আচৰণ কৰে, আৰু মুক্তভাৱে ওলমি থকা চুম্বক সদায় উত্তৰ-দক্ষিণ দিশত থাকে, যিটো কম্পাছৰ নীতি। বৈদ্যুতিক ক্ষমতাৰ একক ৱাট, আৰু বৈদ্যুতিক শক্তি কিলোৱাট-ঘণ্টাত মাপা হয়। শ্ৰেণী বৰ্তনীত, সকলো উপাদানৰ মাজেৰে একে প্ৰবাহ যায়, আনহাতে সমান্তৰাল বৰ্তনীত সকলো শাখাত ভল্টেজ একে আৰু প্ৰবাহ ভাগ হয়। ঘৰুৱা ৱায়াৰিং সমান্তৰালভাৱে হয় যাতে প্ৰতিটো আহিলাই সম্পূৰ্ণ ভল্টেজ পায়। পৰীক্ষাত ওহমৰ সূত্ৰ, প্ৰবাহ, ভল্টেজ আৰু ৰোধৰ একক, আৰু শ্ৰেণী-সমান্তৰাল বৰ্তনী আটাইতকৈ সাধাৰণ বিষয়।
6. Heat, Temperature and States of Matter
তাপ, উষ্ণতা আৰু পদাৰ্থৰ অৱস্থা
Heat is a form of energy that flows from a hotter body to a colder body, while temperature is the degree of hotness or coldness of a body. Heat is measured in calories or joules, while temperature is measured with a thermometer in degrees Celsius, Fahrenheit or Kelvin. Temperature is a measure of the average kinetic energy of the particles in a body, so a body with higher temperature has faster-moving particles. The three common states of matter are solid, liquid and gas. In a solid, the particles are tightly packed and only vibrate about their fixed positions, so solids have a definite shape and volume. In a liquid, the particles are less tightly packed and can slide over one another, so liquids have a definite volume but no definite shape. In a gas, the particles are far apart and move freely, so gases have neither a definite shape nor a definite volume. Heat can be transferred in three ways: conduction, convection and radiation. Conduction is the transfer of heat through a solid material, and metals like copper and iron are good conductors, while wood and plastic are poor conductors or insulators. Convection is the transfer of heat in liquids and gases by the actual movement of the hot fluid, which is how water gets heated in a kettle. Radiation is the transfer of heat without any medium, which is how heat from the sun reaches the earth through the vacuum of space. The change of a solid into a liquid is called melting, the change of a liquid into gas is called vaporisation, and the reverse processes are called freezing and condensation. The temperature at which a liquid boils is called its boiling point, which is 100°C for pure water at standard pressure.
তাপ হৈছে এবিধ শক্তি, যিটো উত্তপ্ত দেহৰ পৰা ঠাণ্ডা দেহলৈ বৈ যায়, আনহাতে উষ্ণতা হৈছে দেহৰ উত্তাপ বা ঠাণ্ডাৰ মাত্ৰা। তাপ কেলৰি বা জুলত মাপা হয়, আনহাতে উষ্ণতা থাৰ্মমিটাৰেৰে ডিগ্রী ছেলছিয়াছ, ফাৰেনহাইট বা কেলভিনত মাপা হয়। উষ্ণতা হৈছে দেহৰ কণাবোৰৰ গড় গতিশক্তিৰ জোখ, সেয়ে উষ্ণতা বেছি হ'লে কণাবোৰ বেছি দ্ৰুত গতিশীল হয়। পদাৰ্থৰ তিনিটা সাধাৰণ অৱস্থা হৈছে কঠিন, তৰল আৰু গেছ। কঠিনত কণাবোৰ টানকৈ বান্ধ খাই থাকে আৰু নিজ নিজ স্থানত কম্পিত হয়হে, সেয়ে কঠিনৰ নিৰ্দিষ্ট আকৃতি আৰু আয়তন থাকে। তৰলত কণাবোৰ কম টানকৈ থাকে আৰু ইজনে সিজনৰ ওপৰেৰে পিছলি যাব পাৰে, সেয়ে তৰলৰ নিৰ্দিষ্ট আয়তন থাকে কিন্তু নিৰ্দিষ্ট আকৃতি নাথাকে। গেছত কণাবোৰ বহু দূৰত থাকে আৰু মুক্তভাৱে চলাচল কৰে, সেয়ে গেছৰ নিৰ্দিষ্ট আকৃতি বা আয়তন একো নাথাকে। তাপ তিনিটা পদ্ধতিত স্থানান্তৰ হ'ব পাৰে: পৰিবহণ, সঞ্চালন আৰু বিকিৰণ। পৰিবহণ হৈছে কঠিন পদাৰ্থৰ মাজেৰে তাপ স্থানান্তৰ, আৰু তাম আৰু লোৰ দৰে ধাতু ভাল পৰিবাহী, আনহাতে কাঠ আৰু প্লাষ্টিক বেয়া পৰিবাহী বা অন্তৰক। সঞ্চালন হৈছে তৰল আৰু গেছত উত্তপ্ত তৰলৰ প্ৰকৃত চলাচলৰ দ্বাৰা তাপ স্থানান্তৰ, যাৰ দ্বাৰাই কেটলীত পানী গৰম হয়। বিকিৰণ হৈছে কোনো মাধ্যম নোহোৱাকৈ তাপ স্থানান্তৰ, যাৰ দ্বাৰাই সূৰ্য্যৰ পৰা তাপ শূন্য স্থান পাৰ হৈ পৃথিৱীত উপস্থিত হয়। কঠিন তৰললৈ পৰিণত হোৱাক গলন, তৰল গেছলৈ পৰিণত হোৱাক বাষ্পীভৱন, আৰু বিপৰীত প্ৰক্ৰিয়াবোৰক হিমায়ন আৰু ঘনীভৱন বোলা হয়। তৰল এটা উতলি যোৱা উষ্ণতাক উতলাংক বোলা হয়, যিটো মানক চাপত বিশুদ্ধ পানীৰ বাবে ১০০°C।
7. Matter: Elements, Compounds and Mixtures
পদাৰ্থ: মৌল, যৌগ আৰু মিশ্ৰণ
Anything that has mass and occupies space is called matter. Matter is made up of very tiny particles called atoms and molecules, which are too small to be seen with the naked eye. Matter can be classified into elements, compounds and mixtures. An element is a pure substance that cannot be broken down into simpler substances by ordinary chemical methods, and it is made up of only one kind of atom. There are about 118 known elements, out of which about 92 are naturally occurring. Some common elements are hydrogen, oxygen, nitrogen, carbon, iron, copper, gold and silver. Each element is represented by a symbol, such as H for hydrogen, O for oxygen, Na for sodium and Fe for iron. A compound is a pure substance formed when two or more elements combine chemically in a fixed ratio. For example, water is a compound formed by hydrogen and oxygen, and common salt is a compound of sodium and chlorine. The properties of a compound are completely different from its constituent elements, for example, sodium is a metal and chlorine is a poisonous gas, but together they form harmless common salt. A mixture is formed when two or more substances are simply mixed together without any chemical reaction. A mixture can be homogeneous, where the composition is uniform throughout, such as salt dissolved in water, or heterogeneous, where the composition is not uniform, such as sand and iron filings. The components of a mixture can be separated by physical methods such as filtration, evaporation, distillation and magnetic separation. Air, sea water and milk are common examples of mixtures. In exams, the classification of matter, examples of elements and compounds, and separation methods are the most commonly asked questions.
যিকোনো বস্তু যাৰ ভৰ আছে আৰু স্থান অধিকাৰ কৰে, তাকে পদাৰ্থ বোলা হয়। পদাৰ্থ পৰমাণু আৰু অণু নামৰ অতি সৰু কণাৰে গঠিত, যিবোৰ খালি চকুৰে দেখা নাযায়। পদাৰ্থক মৌল, যৌগ আৰু মিশ্ৰণত ভাগ কৰিব পাৰি। মৌল হৈছে এনে বিশুদ্ধ পদাৰ্থ যিটো সাধাৰণ ৰাসায়নিক পদ্ধতিৰে সৰু উপাদানত ভাঙিব নোৱাৰি, আৰু ই কেৱল একোটা পৰমাণুৰে গঠিত। প্ৰায় ১১৮ টা মৌল জনা যায়, যাৰ ভিতৰত প্ৰায় ৯২ টা প্ৰাকৃতিকভাৱে পোৱা যায়। হাইড্ৰজেন, অক্সিজেন, নাইট্ৰজেন, কাৰ্বন, লো, তাম, সোণ আৰু ৰূপ হৈছে কিছুমান সাধাৰণ মৌল। প্ৰতিটো মৌল এটা সংকেতেৰে বুজোৱা হয়, যেনে হাইড্ৰজেনৰ বাবে H, অক্সিজেনৰ বাবে O, ছডিয়ামৰ বাবে Na আৰু লোৰ বাবে Fe। যৌগ হৈছে এনে বিশুদ্ধ পদাৰ্থ যিটো দুই বা তাতকৈ বেছি মৌল নিৰ্দিষ্ট অনুপাতত ৰাসায়নিকভাৱে সংযুক্ত হ'লে গঠন হয়। উদাহৰণস্বৰূপে, পানী হাইড্ৰজেন আৰু অক্সিজেনেৰে গঠিত যৌগ, আৰু সাধাৰণ নিমখ ছডিয়াম আৰু ক্ল'ৰিনৰ যৌগ। যৌগৰ ধৰ্মবোৰ ইয়াৰ গঠনকাৰী মৌলবোৰৰ পৰা সম্পূৰ্ণ পৃথক, উদাহৰণস্বৰূপে, ছডিয়াম এটা ধাতু আৰু ক্ল'ৰিন এবিধ বিষাক্ত গেছ, কিন্তু লগ লাগিলে সিহঁতে নিৰাপদ সাধাৰণ নিমখ গঠন কৰে। দুই বা তাতকৈ বেছি পদাৰ্থ কোনো ৰাসায়নিক বিক্ৰিয়া নোহোৱাকৈ মিশ্ৰিত হ'লে মিশ্ৰণ গঠন হয়। মিশ্ৰণ সমজাতীয় হ'ব পাৰে, য'ত গোটেই অংশত গঠন একে, যেনে পানীত লগা নিমখ, বা বিষমজাতীয়, য'ত গঠন একে নহয়, যেনে বালি আৰু লোৰ গুড়ি। মিশ্ৰণৰ উপাদানবোৰ পৰিস্ৰাৱণ, বাষ্পীভৱন, পাতন আৰু চুম্বকীয় পৃথকীকৰণ আদি ভৌতিক পদ্ধতিৰে পৃথক কৰিব পাৰি। বায়ু, সাগৰৰ পানী আৰু গাখীৰ মিশ্ৰণৰ সাধাৰণ উদাহৰণ। পৰীক্ষাত পদাৰ্থৰ শ্ৰেণীবিভাজন, মৌল আৰু যৌগৰ উদাহৰণ, আৰু পৃথকীকৰণ পদ্ধতি আটাইতকৈ সাধাৰণ প্ৰশ্ন।
8. Atomic Structure and the Periodic Table
পৰমাণু গঠন আৰু পৰ্যাবৃত্ত তালিকা
An atom is the smallest particle of an element that takes part in a chemical reaction, and it is made up of three types of subatomic particles: protons, neutrons and electrons. The proton is positively charged, the electron is negatively charged, and the neutron has no charge and is neutral. Protons and neutrons are located in the nucleus, which is the tiny dense centre of the atom, while the electrons revolve around the nucleus in orbits or shells. The number of protons in the nucleus is called the atomic number, and it determines the identity of the element. The total number of protons and neutrons is called the mass number. An atom is electrically neutral because the number of protons is equal to the number of electrons. Electrons are arranged in shells around the nucleus, and the outermost shell is called the valence shell. The electrons in the valence shell are called valence electrons, and they decide the chemical properties of the element. For example, hydrogen has one valence electron, oxygen has six and sodium has one. Atoms of an element that have the same atomic number but different mass numbers are called isotopes. For example, carbon-12 and carbon-14 are isotopes of carbon, and they are used in carbon dating. The periodic table was arranged by Dmitri Mendeleev and later improved, and it organises all elements in rows called periods and columns called groups. Elements in the same group have similar chemical properties because they have the same number of valence electrons. In exams, the charges of subatomic particles, the calculation of atomic number and mass number, and the arrangement of the periodic table are the most commonly asked topics.
পৰমাণু হৈছে ৰাসায়নিক বিক্ৰিয়াত অংশ লোৱা মৌলৰ আটাইতকৈ সৰু কণা, আৰু ই তিনিবিধ উপ-পাৰমাণৱিক কণাৰে গঠিত: প্ৰটন, নিউট্রন আৰু ইলেকট্রন। প্ৰটন ধনাত্মক আধানযুক্ত, ইলেকট্রন ঋণাত্মক আধানযুক্ত, আৰু নিউট্রনৰ কোনো আধান নাই, ই নিৰপেক্ষ। প্ৰটন আৰু নিউট্রন নিউক্লিয়াছত থাকে, যিটো পৰমাণুৰ সৰু ঘন কেন্দ্ৰ, আনহাতে ইলেকট্রনবোৰ নিউক্লিয়াছৰ চাৰিওফালে কক্ষ বা শ্বেলত ঘূৰি থাকে। নিউক্লিয়াছত থকা প্ৰটনৰ সংখ্যাক পৰমাণু সংখ্যা বোলা হয়, আৰু ই মৌলৰ পৰিচয় নিৰ্ধাৰণ কৰে। প্ৰটন আৰু নিউট্রনৰ মুঠ সংখ্যাক ভৰ সংখ্যা বোলা হয়। পৰমাণু বৈদ্যুতিকভাৱে নিৰপেক্ষ কিয়নো প্ৰটনৰ সংখ্যা ইলেকট্রনৰ সংখ্যাৰ সমান। নিউক্লিয়াছৰ চাৰিওফালে শ্বেলত ইলেকট্রনবোৰ সজ্জিত, আৰু আটাইতকৈ বাহিৰৰ শ্বেলটোক ভেলেন্স শ্বেল বোলা হয়। ভেলেন্স শ্বেলৰ ইলেকট্রনবোৰক ভেলেন্স ইলেকট্রন বোলা হয়, আৰু সিহঁতে মৌলৰ ৰাসায়নিক ধৰ্ম নিৰ্ধাৰণ কৰে। উদাহৰণস্বৰূপে, হাইড্রজেনৰ এটা, অক্সিজেনৰ ছটা আৰু ছডিয়ামৰ এটা ভেলেন্স ইলেকট্রন আছে। একে পৰমাণু সংখ্যা কিন্তু বেলেগ ভৰ সংখ্যা থকা মৌলৰ পৰমাণুবোৰক আইছ'টোপ বোলা হয়। উদাহৰণস্বৰূপে, কাৰ্বন-১২ আৰু কাৰ্বন-১৪ হৈছে কাৰ্বনৰ আইছ'টোপ, আৰু সিহঁত কাৰ্বন ডেটিঙত ব্যৱহৃত। পৰ্যাবৃত্ত তালিকা দিমিত্রি মেণ্ডেলীভে সজাইছিল আৰু পিছত উন্নত কৰা হৈছিল, আৰু ই সকলো মৌলক পৰ্যায় নামৰ শাৰী আৰু গোট নামৰ স্তম্ভত সংগঠিত কৰে। একে গোটৰ মৌলবোৰৰ একে ৰাসায়নিক ধৰ্ম থাকে কিয়নো সিহঁতৰ ভেলেন্স ইলেকট্রন সংখ্যা একে। পৰীক্ষাত উপ-পাৰমাণৱিক কণাৰ আধান, পৰমাণু সংখ্যা আৰু ভৰ সংখ্যা গণনা, আৰু পৰ্যাবৃত্ত তালিকাৰ সজ্জা আটাইতকৈ সাধাৰণ বিষয়।
9. Acids, Bases and Salts
এচিড, ক্ষাৰ আৰু লৱণ
Acids, bases and salts are three important groups of chemical compounds. An acid is a substance that tastes sour and turns blue litmus paper red. Common acids include hydrochloric acid found in our stomach, citric acid in lemons, acetic acid in vinegar and sulphuric acid used in car batteries. Strong acids like sulphuric acid can burn skin, so they must be handled with care. A base is a substance that tastes bitter, feels soapy to the touch and turns red litmus paper blue. Bases that dissolve in water are called alkalis. Common bases include sodium hydroxide, which is used in soap making, calcium hydroxide or slaked lime, which is used in whitewashing walls, and magnesium hydroxide, which is used in antacids to cure acidity in the stomach. When an acid reacts with a base, they neutralise each other and form salt and water, and this reaction is called neutralisation. The pH scale is used to measure how acidic or basic a solution is, and it ranges from 0 to 14. A pH value of 7 is neutral, such as pure water, a pH below 7 is acidic, and a pH above 7 is basic. Our stomach produces hydrochloric acid to digest food, but excess acid causes acidity, which is treated by antacids that are bases. A salt is formed when an acid reacts with a base, and common salt or sodium chloride is the most common example. Table salt is obtained from sea water by evaporation. In exams, the properties of acids and bases, litmus paper test, the pH scale and neutralisation are the most commonly asked topics.
এচিড, ক্ষাৰ আৰু লৱণ হৈছে ৰাসায়নিক যৌগৰ তিনিটা গুৰুত্বপূৰ্ণ গোট। এচিড হৈছে এনে পদাৰ্থ যিটো টেঙা সোৱাদযুক্ত আৰু নীলা লিটমাছ কাগজ ৰঙা কৰে। সাধাৰণ এচিডসমূহৰ ভিতৰত আমাৰ পাকস্থলীত থকা হাইড্রক্লৰিক এচিড, লেম্বুত থকা ছাইট্রিক এচিড, ভিনেগাৰত থকা এচিটিক এচিড আৰু কাৰ বেটাৰীত ব্যৱহৃত ছালফিউৰিক এচিড উল্লেখযোগ্য। ছালফিউৰিক এচিডৰ দৰে শক্তিশালী এচিডে ছাল জ্বলাই দিব পাৰে, সেয়ে সাবধানে ব্যৱহাৰ কৰিব লাগে। ক্ষাৰ হৈছে এনে পদাৰ্থ যিটো তিতা সোৱাদযুক্ত, স্পৰ্শত চাবোনৰ দৰে পিছল, আৰু ৰঙা লিটমাছ কাগজ নীলা কৰে। পানীত গুলিব পৰা ক্ষাৰবোৰক এলকালি বোলা হয়। সাধাৰণ ক্ষাৰবোৰৰ ভিতৰত চাবোন তৈয়াৰত ব্যৱহৃত ছডিয়াম হাইড্রক্সাইড, বেৰৰ বগা লেপনত ব্যৱহৃত কেলছিয়াম হাইড্রক্সাইড বা স্লেকড লাইম, আৰু পাকস্থলীৰ এচিডিটি শুশ্ৰূষাত ব্যৱহৃত মেগনেছিয়াম হাইড্রক্সাইড উল্লেখযোগ্য। এচিড আৰু ক্ষাৰ বিক্ৰিয়া হ'লে সিহঁতে ইজনে সিজনক নিৰপেক্ষ কৰি লৱণ আৰু পানী গঠন কৰে, আৰু এই বিক্রিয়াক নিৰপেক্ষকৰণ বোলা হয়। এটা দ্ৰৱ কিমান এচিডিক বা ক্ষাৰীয় তাৰ জোখ pH স্কেলত কৰা হয়, আৰু ই ০ৰ পৰা ১৪ লৈ। pH মান ৭ হৈলে নিৰপেক্ষ, যেনে বিশুদ্ধ পানী, pH ৭ তল হৈলে এচিডিক, আৰু pH ৭ ওপৰ হৈলে ক্ষাৰীয়। আমাৰ পাকস্থলীয়ে খাদ্য হজম কৰিবলৈ হাইড্রক্লৰিক এচিড উৎপন্ন কৰে, কিন্তু বেছি এচিড হ'লে এচিডিটি হয়, যিটো ক্ষাৰ থকা এন্টাচিডেৰে শুশ্রূষা হয়। এচিড আৰু ক্ষাৰ বিক্রিয়া হ'লে লৱণ গঠন হয়, আৰু সাধাৰণ নিমখ বা ছডিয়াম ক্ল'ৰাইড আটাইতকৈ সাধাৰণ উদাহৰণ। সাগৰৰ পানী বাষ্পীভৱনৰ দ্বাৰা টেবুল নিমখ পোৱা যায়। পৰীক্ষাত এচিড আৰু ক্ষাৰৰ ধৰ্ম, লিটমাছ কাগজ পৰীক্ষা, pH স্কেল আৰু নিৰপেক্ষকৰণ আটাইতকৈ সাধাৰণ বিষয়।
10. Chemical Reactions and Everyday Examples
ৰাসায়নিক বিক্রিয়া আৰু দৈনন্দিন উদাহৰণ
A chemical reaction is a process in which new substances are formed with new properties. The substances that take part in a reaction are called reactants, and the new substances formed are called products. A chemical equation is a short way of representing a reaction, for example, when hydrogen burns in oxygen, water is formed, which is written as 2H₂ + O₂ → 2H₂O. In a balanced equation, the number of atoms of each element is the same on both sides, which follows the law of conservation of mass. There are several types of chemical reactions. A combination reaction is when two or more substances combine to form a single product, such as iron and sulphur combining to form iron sulphide. A decomposition reaction is when a single compound breaks down into two or more simpler substances, such as calcium carbonate breaking into calcium oxide and carbon dioxide when heated. A displacement reaction is when a more reactive metal displaces a less reactive metal from its compound, such as iron displacing copper from copper sulphate solution. An oxidation reaction involves the addition of oxygen or loss of hydrogen, and a reduction reaction involves the loss of oxygen or gain of hydrogen. The process of rusting is a slow oxidation of iron in the presence of moisture and air, which forms reddish-brown rust, and it can be prevented by painting, oiling or galvanising. Burning is a fast oxidation reaction that produces heat and light. Digestion of food, photosynthesis, and the souring of milk are all examples of chemical reactions that we see in daily life. In exams, balancing equations, identifying the type of reaction, and examples of oxidation and reduction are the most commonly asked topics.
ৰাসায়নিক বিক্রিয়া হৈছে এনে এটা পদ্ধতি যাৰ দ্বাৰা নতুন ধৰ্ম থকা নতুন পদাৰ্থ গঠন হয়। বিক্রিয়াত অংশ লোৱা পদার্থবোৰক বিক্রিয়ক আৰু গঠন হোৱা নতুন পদার্থবোৰক ফল বোলা হয়। ৰাসায়নিক সমীকৰণ হৈছে বিক্রিয়া এটা বুজাবলৈ চমু উপায়, উদাহৰণস্বৰূপে, অক্সিজেনত হাইড্রজেন জ্বলিলে পানী গঠন হয়, যিটো 2H₂ + O₂ → 2H₂O বুলি লিখা হয়। সমতুল সমীকৰণত দুয়োফালে প্ৰতিটো মৌলৰ পৰমাণু সংখ্যা একে, যিটো ভৰ সংৰক্ষণ নিয়ম অনুসৰণ কৰে। ৰাসায়নিক বিক্রিয়াৰ কেইবাবিধ ধৰণ আছে। সংযোজন বিক্রিয়া হৈছে দুই বা তাতকৈ বেছি পদার্থ লগ লাগি এটা ফল গঠন কৰা, যেনে লো আৰু ছালফাৰ লগ লাগি লো ছালফাইড গঠন। অপচয় বিক্রিয়া হৈছে এটা যৌগ ভাঙি দুই বা তাতকৈ বেছি সৰল পদার্থ হোৱা, যেনে গৰম কৰিলে কেলছিয়াম কার্বনেট ভাঙি কেলছিয়াম অক্সাইড আৰু কার্বন ডাই-অক্সাইড হোৱা। স্থানান্তৰ বিক্রিয়া হৈছে বেছি বিক্রিয়াশীল ধাতুৱে কম বিক্রিয়াশীল ধাতুক ইয়াৰ যৌগৰ পৰা স্থানচ্যুত কৰা, যেনে লোৱে কপাৰ ছালফেট দ্রৱৰ পৰা তাম স্থানচ্যুত কৰা। জাৰণ বিক্রিয়াত অক্সিজেন যোগ বা হাইড্রজেন হেৰুওৱা হয়, আৰু বিজাৰণ বিক্রিয়াত অক্সিজেন হেৰুওৱা বা হাইড্রজেন লাভ হয়। মামৰে ধৰা হৈছে আর্দ্রতা আৰু বায়ু থকা অৱস্থাত লোৰ লেহেমীয়া জাৰণ, যিয়ে ৰঙা-মাটিয়া বৰণৰ মামৰে গঠন কৰে, আৰু ইয়াক ৰং, তেল বা গেলভানাইজিঙেৰে প্ৰতিৰোধ কৰিব পাৰি। জুই লাগা হৈছে দ্রুত জাৰণ বিক্রিয়া যিয়ে তাপ আৰু পোহৰ উৎপন্ন কৰে। খাদ্য হজম, সালোক সংশ্লেষণ আৰু গাখীৰ টেঙা হোৱা দৈনন্দিন জীৱনত দেখা ৰাসায়নিক বিক্রিয়াৰ উদাহৰণ। পৰীক্ষাত সমীকৰণ সমতুল কৰা, বিক্রিয়াৰ ধৰণ চিনাক্ত কৰা, আৰু জাৰণ-বিজাৰণৰ উদাহৰণ আটাইতকৈ সাধাৰণ বিষয়।
11. Metals and Non-Metals: Properties and Uses
ধাতু আৰু অধাতু: ধৰ্ম আৰু ব্যৱহাৰ
Elements can be divided into metals and non-metals on the basis of their properties. Metals are generally shiny, hard, malleable and ductile. Malleability means metals can be beaten into thin sheets, which is why aluminium is used to make foil. Ductility means metals can be drawn into thin wires, which is why copper and aluminium are used for electric wires. Metals are good conductors of heat and electricity, and they are sonorous, which means they produce a ringing sound when struck. The most common metals are iron, copper, aluminium, gold, silver, zinc and lead. Gold and silver are used to make jewellery because they do not tarnish easily. On the other hand, non-metals are generally dull, brittle and poor conductors of heat and electricity. Common non-metals are oxygen, nitrogen, carbon, sulphur, chlorine and hydrogen. Carbon is a non-metal, but it is used in the form of graphite for pencil leads and diamond for cutting tools. In the periodic table, metals are on the left side and non-metals are on the right side, while metalloids like silicon and germanium have properties of both. Metals react with oxygen to form metal oxides, which are basic in nature, and with acids to produce hydrogen gas. Iron reacts with moisture and air to form rust, so it is coated with zinc in a process called galvanisation to protect it. Copper is used to make utensils and electric wires because it is a good conductor, and aluminium is used to make aeroplane bodies because it is light but strong. In daily life, we use metals and non-metals everywhere, and their identification based on properties is a very common exam question in ADRE and other competitive exams.
ধাতু আৰু অধাতু এই দুটা ভাগত ধৰ্মৰ ভিত্তিত মৌলবোৰ ভাগ কৰিব পাৰি। ধাতুবোৰ সাধাৰণতে চিকচিকিয়া, কঠিন, আঘাতযোগ্য (malleable) আৰু টানি লোৱাযোগ্য (ductile)। আঘাতযোগ্য মানে ধাতুবোৰক মিহি পাতলৈ পিটিব পাৰি, এই কাৰণেই এলুমিনিয়াম ফয়েল তৈয়াৰত ব্যৱহৃত হয়। টানি লোৱাযোগ্য মানে ধাতুবোৰক মিহি তাঁৰলৈ টানি আনি বনাব পাৰি, এই কাৰণেই তাম আৰু এলুমিনিয়াম বৈদ্যুতিক তাঁৰত ব্যৱহৃত। ধাতু তাপ আৰু বিদ্যুৎৰ ভাল পৰিবাহী, আৰু সিহঁত অনুনাদী, অৰ্থাৎ কোবালে বাজি উঠে। আটাইতকৈ সাধাৰণ ধাতু হৈছে লো, তাম, এলুমিনিয়াম, সোণ, ৰূপ, জিংক আৰু সীহ। সোণ আৰু ৰূপ সহজে কলঙ্কিত নোহোৱাৰ বাবে আভৰণ তৈয়াৰত ব্যৱহৃত। আনহাতে, অধাতুবোৰ সাধাৰণতে নিষ্প্রভ, ভঙুৰ আৰু তাপ-বিদ্যুৎৰ বেয়া পৰিবাহী। সাধাৰণ অধাতু হৈছে অক্সিজেন, নাইট্রজেন, কাৰ্বন, ছালফাৰ, ক্ল'ৰিন আৰু হাইড্রজেন। কাৰ্বন এটা অধাতু, কিন্তু ই পেঞ্চিলৰ মূৰত গ্রাফাইট আৰু কটা আহিলাত হীৰা ৰূপত ব্যৱহৃত। পৰ্যাবৃত্ত তালিকাত ধাতুবোৰ বাওঁফালে আৰু অধাতুবোৰ সোঁফালে থাকে, আনহাতে ছিলিকন আৰু জার্মেনিয়ামৰ দৰে অর্ধধাতুবোৰ দুয়োটাৰে ধৰ্ম আছে। ধাতুবে অক্সিজেনৰ সৈতে বিক্রিয়া হৈ ধাতৱ অক্সাইড গঠন কৰে, যিবোৰ ক্ষাৰীয়, আৰু এচিডৰ সৈতে বিক্রিয়া হৈ হাইড্রজেন গেছ উৎপন্ন কৰে। লোবে আর্দ্রতা আৰু বায়ুৰ সৈতে বিক্রিয়া হৈ মামৰে গঠন কৰে, সেয়ে গেলভানাইজেশন নামৰ প্রক্রিয়াত জিংকেৰে প্রলেপ দি ইয়াক ৰক্ষা কৰা হয়। তাম ভাল পৰিবাহী বাবে বাচন আৰু বৈদ্যুতিক তাঁৰ তৈয়াৰত, আৰু এলুমিনিয়াম পাতল কিন্তু শক্তিশালী বাবে বিমানৰ দেহা তৈয়াৰত ব্যৱহৃত হয়। দৈনন্দিন জীৱনত আমি আটাইতে ধাতু আৰু অধাতু ব্যৱহাৰ কৰো, আৰু ধৰ্মৰ ভিত্তিত চিনাক্ত কৰা ADRE আৰু অন্যান্য প্রতিযোগিতামূলক পৰীক্ষাত অতি সাধাৰণ প্রশ্ন।
12. Carbon and Its Important Compounds
কাৰ্বন আৰু ইয়াৰ গুৰুত্বপূৰ্ণ যৌগ
Carbon is a unique non-metal that forms the basis of all life on earth, and it can combine with itself and other elements in countless ways because of a special property called catenation, which means the ability of carbon atoms to form bonds with other carbon atoms. Carbon is present in all living things, and its compounds number in the millions, far more than the compounds of all other elements combined. Carbon exists in several allotropic forms, which are different physical forms of the same element. The three most important allotropes of carbon are diamond, graphite and fullerene. Diamond is the hardest natural substance known and is used to cut glass and make jewellery. Graphite is soft, black and a good conductor of electricity, so it is used in pencils and as a lubricant. The compounds of carbon are divided into two large families: organic compounds, which are derived from living things and contain carbon-hydrogen bonds, and inorganic compounds, such as carbon dioxide, carbon monoxide and carbonates. The simplest hydrocarbons are the alkanes, such as methane, ethane and propane, and methane is the main component of natural gas and biogas. Burning carbon compounds in oxygen produces carbon dioxide and water, and this combustion releases energy. Carbon dioxide is essential for photosynthesis and is also a greenhouse gas responsible for global warming. Ethanol, which is alcohol, is used as a fuel and in sanitisers, while acetic acid is present in vinegar. Carbon monoxide is a poisonous gas formed by incomplete burning, which is why closed-room burning of coal is dangerous. In exams, allotropes of carbon, hydrocarbons and carbon dioxide are the most commonly asked topics.
কাৰ্বন হৈছে এটা বিশেষ অধাতু যিটো পৃথিৱীৰ সকলো জীৱনৰ ভেটি, আৰু কেটেনেশ্যন নামৰ বিশেষ গুণৰ বাবে ই নিজেই আৰু আন মৌলৰ সৈতে অগণন ধৰণে সংযুক্ত হ'ব পাৰে, অৰ্থাৎ কাৰ্বন পৰমাণুবোৰৰ নিজৰ মাজতে বন্ধন গঠন কৰাৰ ক্ষমতা। কাৰ্বন সকলো জীৱ বস্তুত আছে, আৰু ইয়াৰ যৌগৰ সংখ্যা লাখ লাখ, আন সকলো মৌলৰ যৌগ লগ লগালেও তাতকৈ বেছি। কাৰ্বন কেইবাটাও এলোট্রপিক ৰূপত থাকে, যিবোৰ একে মৌলৰ বেলেগ ভৌতিক ৰূপ। কাৰ্বনৰ তিনিটা আটাইতকৈ গুৰুত্বপূৰ্ণ এলোট্রপ হৈছে হীৰা, গ্রাফাইট আৰু ফুলেরিন। হীৰা হৈছে জনা আটাইতকৈ কঠিন প্রাকৃতিক পদার্থ আৰু ইয়াক কাঁচ কাটিবলৈ আৰু আভৰণ তৈয়াৰত ব্যৱহাৰ কৰা হয়। গ্রাফাইট কোমল, ক'লা আৰু বিদ্যুৎৰ ভাল পৰিবাহী, সেয়ে পেঞ্চিল আৰু লুব্রিকেন্ট হিচাপে ব্যৱহৃত। কাৰ্বনৰ যৌগবোৰ দুটা ডাঙৰ পৰিয়ালত ভাগ হয়: জৈৱ যৌগ, যিবোৰ জীৱ বস্তুৰ পৰা আহে আৰু কাৰ্বন-হাইড্রজেন বন্ধন থাকে, আৰু অজৈৱ যৌগ, যেনে কার্বন ডাই-অক্সাইড, কার্বন মনো-অক্সাইড আৰু কার্বনেট। আটাইতকৈ সৰল হাইড্রোকার্বনবোৰ হৈছে এলকেন, যেনে মিথেন, ইথেন আৰু প্রোপেন, আৰু প্রাকৃতিক গেছ আৰু বায়োগেছৰ মূল উপাদান হৈছে মিথেন। অক্সিজেনত কার্বন যৌগবোৰ জ্বলিলে কার্বন ডাই-অক্সাইড আৰু পানী উৎপন্ন হয়, আৰু এই দহনে শক্তি মুক্ত কৰে। কার্বন ডাই-অক্সাইড সালোক সংশ্লেষণৰ বাবে অতি প্রয়োজনীয় আৰু ই গ্লোবাল ৱার্মিঙৰ বাবে দায়ী গ্রিনহাউছ গেছো। ইথানল, যিটো এলকোহল, ইন্ধন আৰু চেনিটাইজাৰত ব্যৱহৃত, আনহাতে এচিটিক এচিড ভিনেগাৰত থাকে। কার্বন মনো-অক্সাইড এবিধ বিষাক্ত গেছ যিটো অপূর্ণ দহনে গঠন কৰে, সেয়ে বন্ধ কোঠাত কয়লা জ্বলোৱা বিপজ্জনক। পৰীক্ষাত কাৰ্বনৰ এলোট্রপ, হাইড্রোকার্বন আৰু কার্বন ডাই-অক্সাইড আটাইতকৈ সাধাৰণ বিষয়।
13. The Cell: The Basic Unit of Life
কোষ: জীৱনৰ মূল একক
The cell is the basic structural and functional unit of all living organisms, and it is often called the building block of life. The cell was first discovered by Robert Hooke in 1665, when he observed cork cells under a microscope. Some organisms are made up of a single cell, called unicellular organisms, such as amoeba and bacteria, while others are made up of many cells, called multicellular organisms, such as plants and animals. A cell has three main parts: the cell membrane, the cytoplasm and the nucleus. The cell membrane is the thin outer covering that controls what enters and leaves the cell. The cytoplasm is a jelly-like substance where all the cell organelles are suspended and where many chemical activities take place. The nucleus is the control centre of the cell, and it contains chromosomes, which carry genes made of DNA that determine our characteristics. Plant cells have three extra structures that animal cells do not have: the cell wall, which is made of cellulose and gives strength and shape; chloroplasts, which contain chlorophyll and carry out photosynthesis; and a large vacuole, which stores water and other substances. The tiny structures inside the cell that perform specific functions are called organelles, and the important ones are mitochondria, which are the powerhouse of the cell and release energy, ribosomes, which make proteins, and the endoplasmic reticulum, which transports materials. The jelly-like substance that surrounds the nucleus is the cytoplasm, and the cell membrane is also called the plasma membrane. In exams, the parts of the cell and their functions, and the difference between plant and animal cells, are the most commonly asked questions.
কোষ হৈছে সকলো জীৱিত জীবৰ মূল গঠনগত আৰু কার্যকৰী একক, আৰু ইয়াক জীৱনৰ গাঁথনি শিল বুলিও কোৱা হয়। ১৬৬৫ চনত ৰবার্ট হুকেই প্রথমবাৰ কোষ আৱিষ্কাৰ কৰিছিল, যেতিয়া তেওঁ অণুবীক্ষণ যন্ত্রত কর্ক কোষ পৰ্যবেক্ষণ কৰিছিল। কিছুমান জীব মাত্র এটা কোষেৰে গঠিত, যাৰ নাম এককোষী জীব, যেনে অ্যামিবা আৰু ব্যাকটেরিয়া, আনহাতে আন কিছুমান বহুকোষেৰে গঠিত, যাৰ নাম বহুকোষী জীব, যেনে উদ্ভিদ আৰু প্রাণী। কোষ এটাৰ তিনিটা মূল অংশ আছে: কোষ পর্দা, সাইটোপ্লাজম আৰু নিউক্লিয়াছ। কোষ পর্দা হৈছে পাতল বাহিৰা আৱৰণ যিটোৱে কোষত কি সোমায় আৰু ওলায় নিয়ন্ত্রণ কৰে। সাইটোপ্লাজম হৈছে জেলিৰ দৰে পদার্থ য'ত সকলো কোষীয় অঙ্গবোৰ ওলমি থাকে আৰু বহু ৰাসায়নিক কার্যকলাপ হয়। নিউক্লিয়াছ হৈছে কোষৰ নিয়ন্ত্রণ কেন্দ্র, আৰু ইয়াত ক্রোমোজম থাকে, যিবোৰে আমাৰ বৈশিষ্ট্য নির্ধারণ কৰা DNA-এ গঠিত জিন বহন কৰে। উদ্ভিদ কোষত প্রাণী কোষত নথকা তিনিটা অতিরিক্ত গঠন আছে: কোষ প্রাচীর, যিটো সেলুলোজেৰে নির্মিত আৰু শক্তি আৰু আকৃতি দিয়ে; ক্লোরোপ্লাস্ট, যিটোত ক্লোরোফিল থাকে আৰু সালোক সংশ্লেষণ কৰে; আৰু ডাঙৰ ভেকুওল, যিটো পানী আৰু আন পদার্থ সংৰক্ষণ কৰে। কোষৰ ভিতৰত নিৰ্দিষ্ট কার্য কৰা সৰু গঠনবোৰক অঙ্গক বোলা হয়, আৰু গুৰুত্বপূর্ণবোৰ হৈছে মাইটোকন্ড্রিয়া, যিটো কোষৰ শক্তি-গৃহ আৰু শক্তি মুক্ত কৰে, রাইবোজোম, যিটো প্রোটিন তৈয়াৰ কৰে, আৰু এন্ডোপ্লাজমিক রেটিকুলাম, যিটো পদার্থ পৰিবহণ কৰে। নিউক্লিয়াছক আৱৰি থকা জেলিৰ দৰে পদার্থটো হৈছে সাইটোপ্লাজম, আৰু কোষ পর্দাক প্লাজমা মেমব্রেনও বোলা হয়। পৰীক্ষাত কোষৰ অংশ আৰু সিহঁতৰ কার্য, আৰু উদ্ভিদ-প্রাণী কোষৰ পাৰ্থক্য আটাইতকৈ সাধাৰণ প্রশ্ন।
14. Photosynthesis: The Food Factory of Plants
সালোক সংশ্লেষণ: উদ্ভিদৰ খাদ্য কারখানা
Photosynthesis is the process by which green plants prepare their own food using sunlight, water and carbon dioxide, and it is the only process that can convert light energy into chemical energy on a large scale. The green pigment chlorophyll, which is present in the chloroplasts of leaves, traps the energy of sunlight. Water is absorbed by the roots from the soil and transported upwards through the xylem vessels. Carbon dioxide enters the leaves through tiny pores called stomata, which are present mainly on the underside of the leaves. During photosynthesis, carbon dioxide and water combine in the presence of sunlight and chlorophyll to produce glucose, which is the food of the plant, and oxygen, which is released into the air. The chemical equation of photosynthesis is: carbon dioxide + water → glucose + oxygen, with sunlight and chlorophyll as the conditions. Photosynthesis mainly takes place in the green parts of the plant, especially the leaves, during the daytime. The glucose produced is used by the plant for growth and energy, and the extra food is stored as starch. The oxygen released by plants is essential for all living beings to breathe, and photosynthesis is also the reason why forests are called the lungs of the earth. Stomata are also the site of transpiration, which is the loss of water in the form of water vapour from leaves. In exams, the raw materials and products of photosynthesis, the equation, and the role of chlorophyll and stomata are the most commonly asked questions in ADRE and other competitive exams.
সালোক সংশ্লেষণ হৈছে সেই প্রক্রিয়া যাৰ দ্বাৰা সেউজীয়া উদ্ভিদে সূর্যআলোক, পানী আৰু কার্বন ডাই-অক্সাইড ব্যৱহাৰ কৰি নিজৰ খাদ্য প্রস্তুত কৰে, আৰু ই হৈছে বৃহৎ পৰিমাণে আলোক শক্তি ৰাসায়নিক শক্তিলৈ পৰিবর্তন কৰা একমাত্র প্রক্রিয়া। পাতৰ ক্লোরোপ্লাস্টত থকা সেউজীয়া ৰঞ্জক ক্লোরোফিলে সূর্যআলোকৰ শক্তি ধৰি ৰাখে। মূলৰ দ্বাৰা মাটিৰ পৰা পানী শোষিত হয় আৰু জাইলেম নলীৰে ওপৰলৈ পৰিবহণ হয়। পত্ৰৰ বিশেষকৈ তলত অংশত থকা স্টোমাটা নামৰ সৰু ছিদ্রবোৰেৰে কার্বন ডাই-অক্সাইড সোমাই আহে। সালোক সংশ্লেষণত, সূর্যআলোক আৰু ক্লোরোফিলৰ উপস্থিতিত কার্বন ডাই-অক্সাইড আৰু পানী লগ লাগি গ্লুকোজ (উদ্ভিদৰ খাদ্য) আৰু অক্সিজেন উৎপন্ন হয়, যিটো বতৰলৈ মুক্ত হয়। সালোক সংশ্লেষণৰ রাসায়নিক সমীকৰণ: কার্বন ডাই-অক্সাইড + পানী → গ্লুকোজ + অক্সিজেন, শর্ত হিচাপে সূর্যআলোক আৰু ক্লোরোফিল। সালোক সংশ্লেষণ মূলতঃ উদ্ভিদৰ সেউজীয়া অংশত, বিশেষকৈ দিনৰ সময়ত পাতত হৈ থাকে। উৎপন্ন হোৱা গ্লুকোজ উদ্ভিদে বৃদ্ধি আৰু শক্তিৰ বাবে ব্যৱহাৰ কৰে, আৰু অতিরিক্ত খাদ্য স্টার্চ হিচাপে সংরক্ষিত হয়। উদ্ভিদে মুক্ত কৰা অক্সিজেন সকলো জীৱৰ উশাহ লোৱাৰ বাবে অতি প্রয়োজনীয়, আৰু এই কাৰণেই বনাঞ্চলক পৃথিৱীৰ ফোফা বোলা হয়। স্টোমাটাই পানি বাষ্পীভবনৰ স্থানো, যিটো পত্ৰৰ পৰা পানী বাষ্প ৰূপত হেৰুওৱা প্রক্রিয়া। পৰীক্ষাত সালোক সংশ্লেষণৰ কাঁচামাল আৰু ফল, সমীকৰণ, আৰু ক্লোরোফিল আৰু স্টোমাটাৰ ভূমিকা ADRE আৰু অন্যান্য প্রতিযোগিতামূলক পৰীক্ষাত আটাইতকৈ সাধাৰণ প্রশ্ন।
15. The Human Body: Organ Systems
মানৱ শৰীৰ: অংগ তন্ত্ৰ
The human body is made up of several organ systems that work together to keep us alive and healthy. The skeleton system is made up of 206 bones in an adult human body, and it gives shape, support and protection to the body. The muscular system helps in movement, and there are three types of muscles: skeletal muscles, smooth muscles and cardiac muscles. The digestive system includes the mouth, oesophagus, stomach, small intestine, large intestine and liver, and its function is to break down food into simple substances that the body can absorb. The process of breaking down food is called digestion, and the small intestine is the main site of absorption of digested food, while the liver produces bile juice. The respiratory system includes the nose, windpipe, bronchi and lungs, and its function is to take in oxygen and give out carbon dioxide, which is called breathing. The circulatory system includes the heart, blood and blood vessels, and the heart pumps blood through arteries, veins and capillaries. Arteries carry oxygen-rich blood away from the heart, while veins carry blood back to the heart, and the blood carries oxygen, digested food and waste products. The excretory system includes the kidneys, ureters, bladder and urethra, and the kidneys filter the blood to remove waste products and form urine. The nervous system includes the brain, spinal cord and nerves, and it controls and coordinates all the activities of the body, with the brain as the main control centre. The human brain has three main parts: the cerebrum, which is the thinking part, the cerebellum, which controls balance, and the medulla oblongata, which controls breathing and heartbeat. The largest organ of the human body is the skin, and the hardest part is the tooth enamel. In exams, the functions of each organ system and the main organs are the most commonly asked questions.
মানৱ শৰীৰ কেইবাটাও অংগ তন্ত্ৰেৰে গঠিত, যিবোৰে লগ লাগি আমাক জীৱিত আৰু সুস্থ ৰাখে। প্রাপ্তবয়স্ক মানুহৰ শৰীৰত ২০৬ টা হাড়েৰে কংকাল তন্ত্র গঠিত, আৰু ইয়াৰে শৰীৰক আকৃতি, সহায় আৰু সুৰক্ষা দিয়ে। পেশী তন্ত্রই চলাচলত সহায় কৰে, আৰু তিনিবিধ পেশী আছে: কঙ্কাল পেশী, মসৃণ পেশী আৰু হৃদপেশী। পাচন তন্ত্রত মুখ, খাদ্যনলী, পাকস্থলী, ক্ষুদ্রান্ত্র, বৃহদান্ত্র আৰু যকৃত অন্তর্ভুক্ত, আৰু ইয়াৰ কার্য হৈছে শৰীৰে শোষণ কৰিব পৰা সৰল পদার্থত খাদ্য ভাঙি পেলোৱা। খাদ্য ভঙা প্রক্রিয়াটোক হজম বোলা হয়, আৰু হজম হোৱা খাদ্য শোষণৰ মূল স্থান হৈছে ক্ষুদ্রান্ত্র, আনহাতে যকৃতে পিত্ত রস উৎপন্ন কৰে। শ্বাস তন্ত্রত নাক, বায়ুনলী, ব্রংকাই আৰু ফোফা অন্তর্ভুক্ত, আৰু ইয়াৰ কার্য হৈছে অক্সিজেন গ্রহণ আৰু কার্বন ডাই-অক্সাইড নির্গমন, যাক উশাহ লোৱা বোলা হয়। সংবহন তন্ত্রত হৃদপিণ্ড, তেজ আৰু তেজনলী অন্তর্ভুক্ত, আৰু হৃদপিণ্ডে ধমনী, শিৰা আৰু কৈশিক নলীৰে তেজ পাম্প কৰে। ধমনীয়ে হৃদপিণ্ডৰ পৰা অক্সিজেন সমৃদ্ধ তেজ লৈ যায়, আনহাতে শিৰাই তেজ হৃদপিণ্ডলৈ ঘূৰাই আনে, আৰু তেজে অক্সিজেন, হজম হোৱা খাদ্য আৰু বর্জ্য পদার্থ বহন কৰে। মলমূত্র তন্ত্রত বৃক্ক, মূত্রনলী, মূত্রাশয় আৰু মূত্রনলী অন্তর্ভুক্ত, আৰু বৃক্কই তেজ পৰিশোধিত কৰি বর্জ্য পদার্থ আঁতৰাই মূত্র গঠন কৰে। স্নায়ু তন্ত্রত মস্তিষ্ক, মেৰুদণ্ড আৰু স্নায়ু অন্তর্ভুক্ত, আৰু ইয়াৰে শৰীৰৰ সকলো কার্যকলাপ নিয়ন্ত্রণ আৰু সমন্বয় কৰে, য'ত মস্তিষ্ক মূল নিয়ন্ত্রণ কেন্দ্র। মানৱ মস্তিষ্কৰ তিনিটা মূল অংশ আছে: সেরেব্রাম, যিটো চিন্তা কৰা অংশ, সেরেবেলাম, যিটো ভারসাম্য নিয়ন্ত্রণ কৰে, আৰু মেডুলা অব্লংগাটা, যিটো উশাহ আৰু হৃদস্পন্দন নিয়ন্ত্রণ কৰে। মানৱ শৰীৰৰ আটাইতকৈ ডাঙৰ অংগ হৈছে ছাল, আৰু আটাইতকৈ কঠিন অংশ হৈছে দাঁতৰ এনামেল। পৰীক্ষাত প্রতিটো অংগ তন্ত্রৰ কার্য আৰু মূল অংগবোৰ আটাইতকৈ সাধাৰণ প্রশ্ন।
16. Nutrition: Balanced Diet and Vitamins
পুষ্টি: সুষম আহাৰ আৰু ভিটামিন
Nutrition is the process by which organisms obtain and use food, and a balanced diet is a diet that contains all the necessary nutrients in the correct proportions. The major nutrients are carbohydrates, proteins, fats, vitamins, minerals and water, and roughage or fibre. Carbohydrates and fats give us energy, and carbohydrates are found in rice, wheat, potato and sugar, while fats are found in oil, butter, ghee and nuts. Proteins are the body-building nutrients that help in growth and repair, and they are found in milk, eggs, meat, fish, pulses and soyabean. Vitamins and minerals protect us from diseases and keep the body healthy. Vitamin A is essential for good eyesight and is found in carrots, milk and liver, and its deficiency causes night blindness. Vitamin B complex is essential for the nervous system and is found in whole grains and green vegetables, and its deficiency causes diseases like beriberi. Vitamin C is essential for healthy teeth and gums and is found in citrus fruits like lemon and orange, and its deficiency causes scurvy. Vitamin D is essential for strong bones and teeth because it helps in the absorption of calcium, and it is obtained from sunlight and fish, and its deficiency causes rickets. Vitamin K is essential for blood clotting and is found in green vegetables. Iron is a mineral essential for the formation of haemoglobin in blood, and its deficiency causes anaemia, which makes a person feel weak and tired. Iodine is essential for the thyroid gland, and its deficiency causes goitre. Calcium is essential for strong bones and teeth, and it is found in milk and green leafy vegetables. In exams, the sources and deficiency diseases of vitamins and minerals are the most commonly asked questions.
পুষ্টি হৈছে সেই প্রক্রিয়া যাৰ দ্বাৰা জীব এটাই খাদ্য লাভ আৰু ব্যৱহাৰ কৰে, আৰু সুষম আহাৰ হৈছে এনে আহাৰ য'ত সকলো প্রয়োজনীয় পুষ্টি উপাদান সঠিক অনুপাতত থাকে। মুখ্য পুষ্টি উপাদানবোৰ হৈছে কার্বোহাইড্রেট, প্রোটিন, চর্বি, ভিটামিন, খনিজ পদার্থ আৰু পানী, আৰু রাফেজ বা আঁহ। কার্বোহাইড্রেট আৰু চর্বিয়ে আমাক শক্তি দিয়ে, আৰু চাউল, ঘেঁহু, আলু আৰু চেনিত কার্বোহাইড্রেট, আনহাতে তেল, মাখন, ঘিউ আৰু বাদামত চর্বি পোৱা যায়। প্রোটিন হৈছে দেহ গঠনকাৰী পুষ্টি যাৰে বৃদ্ধি আৰু মেৰামতি হয়, আৰু গাখীৰ, কণী, মাংস, মাছ, ডাল আৰু সয়া বিণত প্রোটিন পোৱা যায়। ভিটামিন আৰু খনিজ পদার্থে ৰোগৰ পৰা ৰক্ষা কৰে আৰু শৰীৰ সুস্থ ৰাখে। ভিটামিন A ভাল দৃষ্টিশক্তিৰ বাবে অত্যাবশ্যক, আৰু ই গাজৰ, গাখীৰ আৰু যকৃতত পোৱা যায়, আৰু ইয়াৰ অভাৱত রাতকানা ৰোগ হয়। ভিটামিন B কমপ্লেক্স স্নায়ু তন্ত্রৰ বাবে অত্যাবশ্যক, আৰু ই খাদ্যশস্য আৰু সেউজীয়া শাকত পোৱা যায়, আৰু ইয়াৰ অভাৱত বেরিবেরি ৰোগ হয়। ভিটামিন C সুস্থ দাঁত আৰু মাড়িৰ বাবে অত্যাবশ্যক, আৰু ই লেম্বু আৰু কমলা আদি টেঙা ফলত পোৱা যায়, আৰু ইয়াৰ অভাৱত স্কার্ভি ৰোগ হয়। ভিটামিন D শক্তিশালী হাড় আৰু দাঁতৰ বাবে অত্যাবশ্যক কিয়নো ই কেলছিয়াম শোষণত সহায় কৰে, আৰু ই সূর্যৰ পোহৰ আৰু মাছৰ পৰা পোৱা যায়, আৰু ইয়াৰ অভাৱত রিকেট ৰোগ হয়। ভিটামিন K তেজ গোট মাৰাত অত্যাবশ্যক, আৰু ই সেউজীয়া শাকত পোৱা যায়। তেজত হিমোগ্লোবিন গঠনৰ বাবে লো এবিধ অত্যাবশ্যক খনিজ, আৰু ইয়াৰ অভাৱত রক্তাল্পতা হয়, যাৰ ফলত মানুহ দুৰ্বল আৰু ক্লান্ত অনুভৱ কৰে। থাইরয়ড গ্রন্থিৰ বাবে আয়োডিন অত্যাবশ্যক, আৰু ইয়াৰ অভাৱত ঘেঁটু ৰোগ হয়। শক্তিশালী হাড় আৰু দাঁতৰ বাবে কেলছিয়াম অত্যাবশ্যক, আৰু ই গাখীৰ আৰু সেউজীয়া পাত জাতীয় শাকত পোৱা যায়। পৰীক্ষাত ভিটামিন আৰু খনিজ পদার্থৰ উৎস আৰু অভাৱজনিত ৰোগ আটাইতকৈ সাধাৰণ প্রশ্ন।
17. Common Diseases and Their Causes
সাধাৰণ ৰোগ আৰু ইয়াৰ কারণ
Diseases are classified into two main types: infectious diseases, which spread from one person to another, and non-infectious diseases, which do not spread. Infectious diseases are caused by microorganisms called pathogens, which include bacteria, viruses, fungi and protozoa. Bacteria are single-celled organisms, and diseases like typhoid, tuberculosis, cholera and pneumonia are caused by bacteria. Tuberculosis, commonly called TB, mainly affects the lungs and is treated with antibiotics, and it spreads through the air when an infected person coughs or sneezes. Viruses are much smaller than bacteria, and diseases like common cold, influenza, chickenpox, measles, polio and COVID-19 are caused by viruses. Malaria is caused by a protozoan called Plasmodium, which is spread by the bite of the female Anopheles mosquito, and dengue fever is caused by a virus spread by the Aedes mosquito. The common cold spreads through the air and by direct contact. Non-infectious diseases are not caused by pathogens and include diseases like diabetes, hypertension or high blood pressure, heart disease and cancer. Diabetes occurs when the body cannot use sugar properly because of a problem with insulin, which is produced by the pancreas. High blood pressure is a condition where the pressure of the blood on the walls of the arteries is too high, and it is a risk factor for heart attack and stroke. Diseases that spread through contaminated food and water are called water-borne diseases, such as cholera and typhoid, and diseases that spread through insect bites are called vector-borne diseases. Preventive measures include drinking clean water, eating hygienic food, washing hands, vaccination and keeping the surroundings clean. In exams, the pathogen-disease pair and the mode of spread are the most commonly asked questions.
ৰোগক মূলতঃ দুই বিধত ভাগ কৰা হয়: সংক্রমক ৰোগ, যিবোৰ এজনৰ পৰা আনজনলৈ বিয়পে, আৰু অসংক্রমক ৰোগ, যিবোৰ নাবিয়পে। সংক্রমক ৰোগবোৰ ৰোগজীৱাণু নামৰ অণুজীৱে সৃষ্টি কৰে, যাৰ ভিতৰত ব্যাকটেরিয়া, ভাইৰাছ, ছত্রাক আৰু প্রোটোজোয়া। ব্যাকটেরিয়া এককোষী জীব, আৰু টাইফয়েড, যক্ষ্মা, কলেরা আৰু নিউমোনিয়া আদি ৰোগ ব্যাকটেরিয়াৰে হয়। যক্ষ্মা, যিটোক সাধাৰণতে TB বোলা হয়, মূলতঃ ফোফাত লাগে আৰু এন্টিবায়োটিকেৰে শুশ্রূষা হয়, আৰু সংক্রমিত ব্যক্তিয়ে কাহ বা হাঁচি মাৰিলে বায়ুৰে ই বিয়পে। ব্যাকটেরিয়াৰ তুলনাত ভাইৰাছ বহু সৰু, আৰু সাধাৰণ ঠাণ্ডা, ইনফ্লুয়েঞ্জা, জলবসন্ত, হাম, পোলিও আৰু COVID-19 আদি ৰোগ ভাইৰাছৰে হয়। মেলেৰিয়া প্লাজমোডিয়াম নামৰ প্রোটোজোয়াৰে হয়, যিটো মাইনা এনোফিলেছ মাখিৰ কামোৰেৰে বিয়পে, আৰু ডেঙ্গু জ্বৰ এবিধ ভাইৰাছজনিত ৰোগ যিটো এডিস মাখিয়ে বিয়পায়। সাধাৰণ ঠাণ্ডা বায়ু আৰু পোনপটীয়া সংস্পর্শেৰে বিয়পে। অসংক্রমক ৰোগ ৰোগজীৱাণুৰে নহয়, আৰু ইয়াৰ ভিতৰত মধুমেহ, উচ্চ রক্তচাপ, হৃদৰোগ আৰু কর্কট ৰোগ অন্তর্ভুক্ত। অগ্নাশয়ে উৎপন্ন হোৱা ইনছুলিনত সমস্যা হ'লে শৰীৰে চেনি সঠিকভাৱে ব্যৱহাৰ কৰিব নোৱাৰে, যাৰ ফলত মধুমেহ হয়। উচ্চ রক্তচাপ হৈছে এনে অৱস্থা য'ত ধমনীৰ দেৱালত তেজৰ চাপ অত্যধিক হয়, আৰু ই হৃদযন্ত্রের ক্রিয়া বন্ধ হোৱা আৰু মস্তিষ্ক স্ট্রোকৰ বাবে ঝুঁকিপূর্ণ কারক। দূষিত খাদ্য আৰু পানীৰে বিয়পা ৰোগবোৰক পানীবাহিত ৰোগ বোলা হয়, যেনে কলেরা আৰু টাইফয়েড, আৰু পোক-পৰুৱাৰ কামোৰেৰে বিয়পা ৰোগবোৰক বাহকবাহিত ৰোগ বোলা হয়। প্ৰতিৰোধমূলক ব্যৱস্থাসমূহ হৈছে বিশুদ্ধ পানী পিৱা, পরিষ্কাৰ খাদ্য খোৱা, হাত ধোৱা, টীকাকৰণ আৰু চৌপাশ পৰিষ্কাৰ ৰখা। পৰীক্ষাত ৰোগজীৱাণু-ৰোগ জোৰা আৰু বিয়পাৰ পদ্ধতি আটাইতকৈ সাধাৰণ প্রশ্ন।
18. Plant Life: Parts, Functions and Reproduction
উদ্ভিদ জীৱন: অংশ, কার্য আৰু প্রজনন
A flowering plant has four main parts: the root, the stem, the leaves and the flowers. The root grows downwards into the soil, and it anchors the plant and absorbs water and minerals from the soil. The stem grows upwards, and it supports the plant and transports water and food between the roots and the leaves. The leaves are the food factories of the plant, and they carry out photosynthesis with the help of sunlight. The flower is the reproductive organ of the plant. The leaf has tiny pores called stomata, which allow the exchange of gases, and veins, which carry water and food. Plants reproduce in two main ways: sexual reproduction and asexual reproduction. In sexual reproduction, the flower is the reproductive part, and the male part of the flower is the stamen, which produces pollen grains containing the male gametes, while the female part is the pistil, which contains the ovules with the female gametes. The transfer of pollen grains from the anther to the stigma is called pollination, and it can be carried out by insects, wind or birds. After pollination and fertilisation, the ovule develops into a seed, and the ovary develops into a fruit. Seeds are dispersed by wind, water and animals, and a seed contains a baby plant called the embryo and stored food. In asexual reproduction, a new plant is produced from a single parent without seeds, and common methods include stem cuttings, as in sugarcane and rose, grafting, as in mango, and budding, as in yeast. Farmers use vegetative propagation to grow many plants quickly. In exams, the parts of a flower, pollination, and the methods of asexual reproduction are the most commonly asked topics.
পুষ্পিত উদ্ভিদ এটাৰ চাৰিটা মূল অংশ আছে: মূল, কাণ্ড, পাত আৰু ফুল। মূল মাটিত তললৈ বাঢ়ে, আৰু ই উদ্ভিদক দৃঢ়ভাৱে ৰাখে আৰু মাটিৰ পৰা পানী আৰু খনিজ পদার্থ শোষণ কৰে। কাণ্ড ওপৰলৈ বাঢ়ে, আৰু ই উদ্ভিদক সহায় দিয়ে আৰু মূল আৰু পাতৰ মাজত পানী আৰু খাদ্য পৰিবহণ কৰে। পাত হৈছে উদ্ভিদৰ খাদ্য কারখানা, আৰু সূর্যআলোকৰ সহায়ত ই সালোক সংশ্লেষণ কৰে। ফুল হৈছে উদ্ভিদৰ প্রজনন অংগ। পাতত স্টোমাটা নামৰ সৰু ছিদ্র থাকে, যাৰে গেছ বিনিময় হয়, আৰু শিৰাবোৰ থাকে, যাৰে পানী আৰু খাদ্য পৰিবহণ হয়। উদ্ভিদে দুই মূল পদ্ধতিত প্রজনন কৰে: যৌন প্রজনন আৰু অযৌন প্রজনন। যৌন প্রজননত, ফুল হৈছে প্রজনন অংগ, আৰু ফুলৰ পুরুষ অংশ হৈছে পুংকেশৰ, যিটো পুরুষ যৌন কোষ থকা পরাগরেণু উৎপন্ন কৰে, আনহাতে স্ত্রী অংশ হৈছে স্ত্রীকেশর, যিটো স্ত্রী যৌন কোষ থকা ডিম্বক ধাৰণ কৰে। পুংকেশৰৰ পৰা স্ত্রীকেশৰলৈ পরাগরেণু স্থানান্তর হোৱাক পরাগায়ন বোলা হয়, আৰু ই পোক-পৰুৱা, বতাহ বা চৰাইৰে হ'ব পাৰে। পরাগায়ন আৰু নিষেক্চনৰ পিছত, ডিম্বকটো বীজলৈ আৰু ডিম্বাশয়টো ফললৈ বিকশিত হয়। বীজ বতাহ, পানী আৰু প্রাণীৰে বিস্তৃত হয়, আৰু বীজত ভ্রূণ নামৰ শিশু উদ্ভিদ আৰু সঞ্চিত খাদ্য থাকে। অযৌন প্রজননত, বীজ নোহোৱাকৈ এটা একক মূল উদ্ভিদৰ পৰা নতুন উদ্ভিদ উৎপন্ন হয়, আৰু সাধাৰণ পদ্ধতিসমূহ হৈছে কাণ্ড কাটি ৰোৱা, যেনে আখ আৰু গোলাপ, কলম, যেনে আম, আৰু মুকুলায়ন, যেনে ইস্ট। কৃষকসকলে শীঘ্রে বহু উদ্ভিদ উৎপাদনৰ বাবে উদ্ভিজ্জ প্রজনন ব্যৱহাৰ কৰে। পৰীক্ষাত ফুলৰ অংশ, পরাগায়ন, আৰু অযৌন প্রজনন পদ্ধতি আটাইতকৈ সাধাৰণ বিষয়।